R N ep o ro t fo du r ct io n OPERATOR’S MANUAL Front Tine Tiller Mfg. No. 1695578 1695584 1695921 Description 5521FT, 5.5 TP Front Tine Tiller 5521FT, 5.5 TP Front Tine Tiller 5521FT, 5.
N ep o ro t fo du r ct io n R
Table of Contents MODEL IDENTIFICATION .......................................... 3 Start-up .................................................................. 1 0 Operating Speed .................................................... 11 Shutting Down ........................................................ 11 Tilling ...................................................................... 1 1 SAFETY RULES ......................................................... 4 Owner's Responsibility .....................
Safety Rules OWNER’S RESPONSIBILITY ! DANGER Accurate assembly and safe and effective use of the rototiller is the owner’s responsibility. s Read and follow all safety instructions. s Carefully follow all assembly instructions. s Maintain the tiller according to directions and schedule included in this Earthquake operator’s manual. s Ensure that anyone who uses the tiller is familiar with all controls and safety precautions.
Safety Rules c. Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. IMPORTANT THE RIGHT AND LEFT SIDES OF YOUR ROTOTILLER ARE DETERMINED FROM THE OPERATING POSITION AS YOU FACE THE DIRECTION OF FORWARD TRAVEL. ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL.YOU MUST ADD ENGINE OIL BEFORE STARTING ENGINE. d. Replace gasoline cap securely and clean up spilled fuel before restarting. s Never attempt to make any adjustments while the engine is running.
Safety Rules SAFETY DECALS This rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.
Unpacking and Assembly UNPACK TILLER AND ASSEMBLE IMPORTANT 1. Open top of carton and remove handlebar assembly. THE RIGHT AND LEFT SIDES OF YOUR ROTOTILLER ARE DETERMINED FROM THE OPERATING POSITION AS YOU FACE THE DIRECTION OF FORWARD TRAVEL. ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL.YOU MUST ADD ENGINE OIL BEFORE STARTING ENGINE. 2. Find parts packet. Parts packet contains: 6- 5/16-18 x 1-3/4” bolts 6- 5/16” spring lockwashers 2- hand knobs 4- locknuts 2- 1/2” push nuts 1- detent pin 3.
Features The advantage of the Simplicity/Snapper™ gear drive rototiller over other front tine tillers, is the exclusive unfolding and flexible drag bar. This gives the gear drive tiller its stability and its versatility. For easy transport, fold the wheels under the engine. During operation, the wheels unfold back and the drag bar folds down. The long length between the tines and the drag bar make this the most comfortable front tine tiller on the market.
Controls DRIVE SAFETY CONTROL LEVER ! CAUTION Engage tines into forward, releasing returns machine to neutral. Pulling down on drive safety control lever engages the tines. Releasing the drive safety control lever disengages the tines to a neutral position. BELT TENSION ADJUSTMENT Proper belt tension is critical to good performance. After 1/2 hour of operation, all cables may have to be adjusted due to initial stretch. Thereafter, check tension after every 2 hours of operation.
Operation PRE-START INSPECTION IMPORTANT 1. Make sure all safety guards are in place and all nuts and bolts are secure. 2. Check oil level in engine crankcase. See your engine manual for procedure and specifications. 3. Inspect air cleaner for cleanliness. See your engine manual for procedure. 4. Check the fuel supply. Fill the fuel tank no closer than 1 inch from top of tank to provide space for expansion. See your engine manual for fuel recommendations. 5.
Operation OPERATING SPEED ! WARNING For normal tilling, set the throttle lever to “fast”. SHUTTING DOWN To stop the engine at any time, move throttle control to the off position. To stop wheels and tines at any time, release the drive safety control lever to the neutral position. TILLING EXTREME CAUTION MUST BE TAKEN IN SELECTING TILLING DEPTH. IF YOU ATTEMPT TO TILL TOO DEEPLY FOR SOIL CONDITIONS, THAT IS, WITH THE DRAG STAKE IN TOO HIGH A POSITION, LOSS OF CONTROL COULD RESULT.
Maintenance MAINTENANCE SCHEDULE Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you with years of reliable operation. Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance. Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
Maintenance CHECK BELT TENSION ! WARNING Belt tension may decrease over time. It must be adjusted within the first half hour of operation, and checked after every two hours of operation. Proper adjustment will assure long belt life. Too much or too little belt tension will cause premature belt failure. To check and adjust the forward belt tension: CHECK FORWARD BELT TENSION REGULARLY. TOO MUCH OR TOO LITTLE TENSION WILL CAUSE PREMATURE BELT FAILURE. 1. Turn off engine. Engine must be cool. 2.
Maintenance ENGINE MAINTENANCE IMPORTANT Refer to the engine manual included in your parts packet for information on engine maintenance. Your engine manual provides detailed information and a maintenance schedule for performing the following tasks: ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL. YOU MUST ADD ENGINE OIL BEFORE STARTING ENGINE. ENGINE CAN OVERHEAT AND BECOME DAMAGED IF DEBRIS BLOCKS THE COOLING SYSTEM OR ROTATING SCREEN. NEVER RUN ENGINE WITHOUT COMPLETE AIR CLEANER INSTALLED ON ENGINE. 1.
Maintenance PREPARE FOR STORAGE ! WARNING Follow the steps below to prepare your tiller for storage. Read your engine manual for detailed instructions on preparing the engine for storage. DO NOT STORE TILLER IN AN UNVENTILATED AREA WHERE FUEL FUMES MAY REACH FLAME, SPARKS, PILOT LIGHTS OR AN IGNITED OBJECT. DRAIN FUEL OUTDOORS AWAY FROM ANY IGNITION SOURCES. USE ONLY APPROVED FUEL CONTAINERS. 1. Protect wheels and axles from rust: - Coat the axles lightly with axle grease. 2.
Truobleshooting and Repair TROUBLESHOOTING GUIDE ! WARNING While normal care and routine maintenance will extend the life of your rototiller, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly. The troubleshooting guide below lists the most common problems, causes and remedies. PRACTICE SAFETY AT ALL TIMES.
Technical Manuals Additional Technical Literature Available Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the product’s components in exploded views (3D illustrations which show the relationship of parts and how they go together) as well as part numbers and quantities used. Important assembly notes and and torque values are also included. R N ep o ro t fo du r ct io n Technical manuals can be downloaded from: www.simplicitymfg.com www.
BRIGGS & STRATTON POWER PRODUCTS GROUP, L.L.C. OWNER WARRANTY POLICY LIMITED WARRANTY Briggs & Stratton Power Products Group, LLC will repair and/or replace, free of charge, any part(s) of the equipment that is defective in material or workmanship or both. Briggs & Stratton Corporation will repair and/or replace, free of charge, any part(s) of the Briggs and Stratton engine* (if equipped) that is defective in material or workmanship or both.
N ep o ro t fo du r ct io n R
N ep o ro t fo du r ct io n R www.simplicitymfg.com www.snapper.com Briggs & Stratton Power Products Group, L.L.C. Copyright © 2011 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved www.BRIGGSandSTRATTON.
