Description of the vacuum (The chances are you’re never going to read me) Owner’s Manual models X9 & G9 www.SimplicityVac.
.
Contents Important Safety Instructions Polarization Instructions Description of the Vacuum Before Using Your Synergy for the First Time 2 3 4 6 Operation Unwinding the Power Cord Vacuuming Carpet Vacuuming Hard Surfaces Brushroll Auto Shut-off Feature Dirt Sensing Display Carpet Height Adjustment Vacuuming Under Furniture Carrying the Vacuum 7 8 8 8 9 9 10 11 Attachment Cleaning Wand Cleaning Cleaning Tools Adjusting the Suction Power Optional Hose Extension Disconnecting the Hose 12 13 15 16 16 Mai
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE he manufacturer cannot accept responsibility for damage WARNING: Tcaused when the appliance is not used according to the instructions or for uses other than those for which it was intended. To reduce the risk of fire, electric shock or injury: • Do not leave appliance when plugged in.
Polarization Instructions POWER CORD, 2-WIRE POLARIZED CORD Household models: X9 & G9 To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet.
Description of the Vacuum 1 2 3 14 4 15 16 5 17 18 27 6 26 19 7 25 24 20 21 8 23 22 9 10 11 12 13 4
Description of the Vacuum 1 ComfortGrip™ Handle 2 Main On/Off Power Switch 3 Carpet/Hardwood Floor Switch 4 40' Power Cord 5 Carrying Handle 6 Bag Compartment Latch (to Replace Vacuum Bag) 7 Exhaust Filter Cover 8 Vacuum Nozzle 9 Change Filter Indicator 10 Full Bag/Clog Indicator 11 Brushroll Jam Indicator 12 Twin LED Headlamps 13 Furniture Guard 14 Quick Release Cord Hook 15 Deluxe Dusting Brush 16 Readyreach™ Tools 17 Combination Dusting/Upholstery Tool 18 Tool Activati
Before Using Your Synergy for the First Time Attaching the Handle to the Vacuum • Remove the handle screw located on the back of the vacuum. Insert the handle downward into the body of the vacuum. Insert screw and tighten. • Open bag compartment lid to ensure vacuum bag is in place. • Your vacuum is now ready for use.
Operation Unwinding the Power Cord • The upper cord hook rotates to allow for quick access to the power cord.
Operation Vacuuming Carpet Brushroll Auto Shut-off Feature • For carpet cleaning, press the “On/Off” Note: When the Synergy is turned on and switch on and press the “Carpet” switch in the upright position, the brushroll will not on. Both lights should be lit. spin as to eliminate the possibility of damage to floor surfaces. The brushroll will spin when the handle is lowered, provided the “Carpet” Vacuuming Hard Surfaces switch is on. • For bare floor cleaning (i.e.
Operation Dirt Sensing Display (G9 model only) The Premium Synergy is equipped with two amber lights that illuminate the edges of the cleaning path when your vacuum detects that dirt is being picked up by the machine (while in the carpet cleaning mode). Continue vacuuming this area until the amber lights no longer illuminate. When only the white headlights are illuminated, the Premium Synergy has removed all of the deeply embedded dirt from your carpet, and you should move on to a new area.
Operation Vacuuming Under Furniture Your Simplicity Synergy will lay flat on the floor for effective cleaning under beds and tables. • Press the Handle Release Pedal once for normal vacuuming. • Press the Handle Release Pedal a second time to enable the vacuum to lay flat on the floor.
Operation Carrying the Vacuum To safely transport your vacuum, especially when carrying the vacuum up and down stairs, use the ergonomic Carry Handle.
Attachment Cleaning Wand Cleaning With the on-board cleaning tools and vacuum wand, your Simplicity Synergy becomes a comprehensive cleaning system. Included with your vacuum is an upholstery tool, dusting brush, crevice tool, telescopic wand and a 5-to-1 stretch hose. • To use the cleaning tools, lift the Telescopic Wand straight up from the vacuum. Turn the Tool Activation Dial to the “Tools On” position. The wand is now activated for quick cleaning.
Attachment Cleaning Cleaning Tools Your vacuum is equipped with a deluxe dusting brush, upholstery tool and crevice tool. Other tools are available at your Authorized Simplicity Retailer. • Remove the Telescopic Wand from the vacuum and turn the Tool Activation Dial to the “Tools On” position. (See page 12) • Insert any of the tools onto the end of the wand. D usting Brush: Ideal for tabletops, shelves, blinds or hard surface floors.
Attachment Cleaning Cleaning Tools continued… Cleaning tools can also be attached to the curved handle for above-floor cleaning. • Disconnect the Telescopic Wand from the curved handle by pressing the Wand Release Button. • Attach any of the cleaning tools directly to the curved handle.
Attachment Cleaning Adjusting the Suction Power for Tool Cleaning Full suction power might be too strong for some cleaning situations. For example, reduced suction power would be appropriate for cleaning sheer curtains. • On the curved handle, locate the Suction Relief Valve and slide it backward. This reduces the suction power coming through the tool. Slide the valve forward when finished to restore full suction power.
Attachment Cleaning Optional Hose Extension (STAE) In order to gain another six feet of tool cleaning reach, a small section of stretch hose can be spliced into the current hose arrangement with the optional Hose Extension Kit available only through your Authorized Simplicity Retailer. Disconnecting the Hose for Attachment Cleaning To attach the longer hose from an optional attachment kit, disconnect the hose from the back of the vacuum by pressing the two buttons on the sides of the Hose Disconnect Cuff.
Maintenance and Care When to Change the Vacuum Bag The full bag indicator light is designed to show when the bag is full or when there is a clog in the vacuum. Filter The system measures airflow and alerts the Full Bag user when airflow is significantly reduced— most commonly from full bags and clogs. The light could also come on when vacuuming fine powders such as flour or Yellow Warning Light drywall dust.
Maintenance and Care Replacing the Vacuum Bag • Open the bag compartment lid. • Remove vacuum bag by pressing the bag tab. • To insert a new bag, place the base of the bag collar on the bag supports. Then secure the top of the bag collar with the bag tab. • Tuck the bag corners into the vacuum before replacing the bag compartment lid. • Close lid and press latch back into place.
Maintenance and Care When to Change the Filters The filters on your Synergy vacuum should be replaced after 25 hours of operation. The Synergy is equipped with a filter clock to monitor the actual hours of operation and will illuminate the change filter indicator light on the nozzle of your vacuum when 25 hours of operation have elapsed.
Maintenance and Care Replacing the HEPA Media Exhaust Filter cont. • Re-attach the exhaust filter holder to the vacuum by aligning the slot at the base of the filter holder with the clip on the vacuum and press firmly into place. Replacing the Charcoal Filter (X9 model only) • Open the bag compartment lid and locate the charcoal filter on the left side of the compartment. • Using the latch on top, remove the charcoal filter holder. • Remove and throw away the used filter.
Maintenance and Care Replacing the Direct Air Motor Filter • Press the Handle Release Pedal with your foot, and tilt the handle back until it stops. Press the pedal again to lower the handle to the floor. • Pull the black filter cover latch to access the filter. • Remove and discard the used filter. • Insert new direct air motor filter and snap the filter cover back into place. • Return vacuum handle to its upright position.
Problem Solving Guide Full Bag or Clog Indicator Light The full bag indicator light is designed to show when the bag is full or when there is a clog in the vacuum. Filter Clock The system measures airflow and alerts the user when airflow is significantly reduced— Full Bag most commonly from full bags and clogs. The light could also come on when vacuuming fine powders such as flour or drywall dust.
Problem Solving Guide Jammed Brushroll If an object, such as a throw rug or article of clothing is ever picked up into your vacuum, the vacuum will sense this “jammed brushroll” condition and turn off the brushroll. When this happens, the “brushroll warning” light on the top of the Brushroll nozzle will light up in red. • Turn off the vacuum and remove the cause of the jam. Turn vacuum back on.
Problem Solving Guide Troubleshooting WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with wet hands.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Simplicity Synergy vacuum. How Long Coverage Lasts: Warranty coverage for your Simplicity vacuum lasts eight years for household use. Synergy Household Vacuum Cleaners used professionally are only warranted for ninety days. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse, or improper m aintenance.
Owner’s Information (keep this for your records) The model and serial number of this product may be found on the back side of the unit. You should note the model and serial number of your unit in the spaces provided below, and retain this book as a permanent record of your purchase.
Notes 27
Notes 28
Notes
www.SimplicityVac.
