Description of the vacuum (The chances are you’re never going to read me) Owner’s Manual models X9 & G9 www.simplicityvac.
Contents IMPORTANT SAFETY INSTRUCTIONS Polarization instructions Description of the vacuum Before using your Synergy for the first time 2 3 4 6 Operation Unwinding the power cord Vacuuming carpet Vacuuming hard surfaces Dirt sensing display Carpet height adjustment Vacuuming under furniture Carrying the vacuum 7 8 8 9 9 10 11 Attachment Cleaning Wand cleaning Cleaning tools Adjusting the suction power Optional attachment kits Hose disconnect Optional hose extension 12 13 15 16 17 17 Maintenance
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE he manufacturer cannot accept responsibility for damage WARNING: Tcaused when the appliance is not used according to the instructions, or for uses other than those for which it was intended. To reduce the risk of fire, electric shock or injury: • Do not leave appliance when plugged in.
Polarization Instructions POWER CORD, 2-WIRE POLARIZED CORD Household models: X9 & G9 To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet.
Description of the vacuum 1 2 3 14 4 5 6 18 17 7 16 13 15 19 23 20 8 22 21 11 12 24 9 10
Description of the vacuum 1 ComfortGrip™ handle 2 Main on / off power switch 3 Carpet / bare floor switch 4 35' power cord 5 ReadyReach™ tools 6 Carrying handle 7 Bag compartment latch (to replace vacuum bag) 8 Vacuum nozzle 9 Twin LED headlamps 10 Furniture guard 11 Change filter indicator 12 Full bag / clog indicator 13 Exhaust filter cover 14 Quick release cord hook 15 Telescopic wand 16 5-to-1 stretch hose 17 Tool activation dial 18 Combination dusting / upholstery bru
Before using your Synergy for the first time Attaching the handle to the vacuum • Remove the handle screw located on the back of the vacuum. Insert the handle downward into the body of the vacuum. Insert screw and tighten. • Open bag compartment lid to ensure vacuum bag is in place. • Your vacuum is now ready for use.
Operation Unwinding the power cord • The upper cord hook rotates to allow for quick access to the power cord.
Operation Vacuuming carpet Brushroll auto shut-off feature • For carpet cleaning, press the “on / off” Note: When the Synergy is turned on and switch on and press the “carpet” switch in the upright position, the brushroll will not on. Both lights should be lit. spin as to eliminate the possibility of damage to floor surfaces. The brushroll will spin when the handle is lowered, provided the “carpet” Vacuuming hard surfaces switch is on. • For bare floor cleaning (i.e.
Operation Dirt sensing display (G9 model only) The Premium Synergy is equipped with two amber lights that illuminate the edges of the cleaning path when your vacuum detects that dirt is being picked up by the machine (while in the carpet cleaning mode). Continue vacuuming this area until the amber lights no longer illuminate. When only the white headlights are illuminated, the Premium Synergy has removed all of the deeply embedded dirt from your carpet and you should move on to a new area.
Operation Vacuuming under furniture Your Simplicity Synergy will lay flat on the floor for effective cleaning under beds and tables. • Press the foot pedal release once for normal vacuum cleaning. • Press the foot pedal release a second time to enable the vacuum to lay flat on the floor.
Operation Carrying the vacuum To safely transport your vacuum, especially when carrying the vacuum up and down stairs, use the ergonomic carry handle.
Attachment Cleaning Wand cleaning With the on-board cleaning tools and vacuum wand, your Simplicity Synergy becomes a comprehensive cleaning system. Included with your vacuum is an upholstery tool, dusting brush, crevice tool, telescopic wand and a 5-to-1 stretch hose. • To use the cleaning tools, lift the wand straight up from the vacuum. Turn the tool activation dial to the “on” position. The cleaning wand is now activated for quick cleaning.
Attachment Cleaning Your vacuum is equipped with a dusting brush, upholstery brush and crevice tool. Other tools are available at your Authorized Simplicity Retailer. • Remove the cleaning wand from the vacuum and turn the tool activation dial to the “on” position. (See page 12) • Insert any of the tools onto the end of the wand. D usting brush: Ideal for table tops, shelves, blinds or hard surface floors. U pholstery tool: Ideal for soft surfaces like chairs and couches.
Attachment Cleaning Cleaning tools continued… Cleaning tools can also be attached to the curved handle for above-floor cleaning. • Disconnect the wand from the curved handle by pressing the release button. • Attach any of the cleaning tools directly to the curved handle.
Attachment Cleaning Adjusting the suction power for tool cleaning Full suction power might be too strong for some cleaning situations. For example, reduced suction power would be appropriate for cleaning sheer curtains. • On the curved handle, locate the suction relief valve and slide it backward. This reduces the suction power coming through the tool. Slide the valve forward when finished to restore full suction power.
Attachment Cleaning Optional premium stair cleaning kit An accessory stair cleaning kit is available through your Authorized Retailer. The kit is a safe and effective way to keep your stairs clean. • Remember to activate tool use, you must turn the tool activation dial to the “on” position. Optional stair cleaning kit A basic stair cleaning kit is available through your Authorized Retailer. The kit contains a 12’ extension hose and a turbo brush.
Attachment Cleaning Optional hose extension In order to gain another six feet of tool cleaning reach, a small section of stretch hose can be spliced into the current hose arrangement with the optional hose extension kit available only through your Authorized Simplicity Retailer. Disconnecting the hose for attachment cleaning To attach the longer hose from an optional attachment kit, disconnect the hose from the back of the vacuum by pressing the two buttons on the sides of the hose cuff.
Maintenance and Care When to change the vacuum bag The full bag indicator light is designed to show when the bag is full or when there is a clog in the vacuum. Filter The system measures airflow and alerts the Full Bag user when airflow is significantly reduced— most commonly from full bags and clogs. The light could also come on when vacuuming fine powders such as flour or Yellow Warning Light drywall dust.
Maintenance and Care Replacing the vacuum bag • Open the bag compartment lid. • Remove vacuum bag by pressing the bag tab. • To insert a new bag, place the base of the bag collar on the bag supports. Then secure the top of the bag collar with the bag tab. • Tuck the bag corners into the vacuum before replacing the bag compartment lid. • Close lid and press latch back into place.
Maintenance and Care When to change filters The filters on your Synergy vacuum should be replaced after 25 hours of operation. The Synergy is equipped with a filter clock to monitor the actual hours of operation and will illuminate the change filter indicator light on the nozzle of your vacuum when 25 hours of operation have elapsed. When the filters are replaced, reset the filter clock (while the vacuum is running) by removing cap and pressing the reset button when replacing filter.
Maintenance and Care Replacing the HEPA exhaust filter cont. • Re-attach the exhaust filter holder to the vacuum by aligning the slot at the base of the filter holder with the clip on the vacuum and press firmly into place. Replacing the charcoal filter • Open the bag compartment lid and locate the charcoal filter on the left side of the compartment. • Using the latch on top, remove the charcoal filter holder. • Remove and throw away the used filter.
Maintenance and Care LIfetime belt protection warranty Your vacuum belt is covered with a lifetime warranty. Should the vacuum belt break, simply bring your vacuum or the broken belt to your Authorized Simplicity Retailer for a free replacement. Annual checkup reminder To keep your vacuum in peak operating condition, it is recommended you bring your Synergy to your Authorized Simplicity Retailer for an annual checkup.
Problem Solving Guide Full bag or clog indicator light The full bag indicator light is designed to show when the bag is full or when there is a clog in the vacuum. Filter Clock Full Bag The system measures airflow and alerts the user when airflow is significantly reduced— most commonly from full bags and clogs. The light could also come on when vacuuming fine powders such as flour or Yellow Warning Light drywall dust.
Problem Solving Guide Jammed brushroll If an object, such as a throw rug or article of clothing is ever picked up into your vacuum, the vacuum will sense this “jammed brushroll” condition and turn off the brushroll. When this happens, the “brushroll warning” light on the top of the Brushroll nozzle will light up in red. • Turn off the vacuum and remove the cause of the jam. Turn vacuum back on.
Problem Solving Guide Trouble Shooting PROBLEM POSSIBLE REASON POSSIBLE SOLUTION Vacuum won’t turn on • Power cord not firmly plugged in • Blown fuse or tripped breaker • Plug unit in firmly • Needs service Vacuum won’t pick up or low suction • “Carpet” switch not on • Vacuum bag full • Clogged filter • Hose clogged • Worn brush strips • Broken belt Dust escaping from vacuum • Check house fuse or breaker. Replace fuse / reset breaker.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Simplicity Synergy vacuum. How Long Coverage Lasts: Warranty coverage for your Simplicity vacuum lasts six years for household use. Synergy Household Vacuum Cleaners used professionally are only warranted for ninety days. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse, or improper maintenance.
Owner’s Warranty Information keep this for your records… Date of purchase Serial number Model number Filter type Purchased from: Store name Address City, State, Zip Telephone 27
Notes
Notes
www.simplicityvac.
