Specifications

Synergy Nano Technical Manual, Revision -
Page 118
Panel Lock Feature Setup
To setup the Panel Lock feature follow these steps:
1. Specify the password for each user level.
2. Specify the user level for each of the 8 Screens.
3. Set the Panel On/Off Keys as required.
4. Set Unlock Duration time (in units of minutes).
5. Set Panel Lock to "Locked".
Once locked, access to your controller is now restricted.
Any user touch on a password protected screen, whether locally through the touch screen or via a web
browser will pop up a password entry dialog box. The user can enter the password to unlock that screen or
press Cancel and return to the Main screen.
The Panel Lock feature setup is done from the Setup screen’s Panel Lock Folder.