Specifications

Synergy Nano Technical Manual, Revision -
Page 122
When the “Enter Password” dialog appears, the user must enter the password and then press OK to unlock
the panel.
Once unlocked, the touch panel will allow access to any screens assigned that access level or any lower
level screens.
In addition, the panel will automatically re-lock after a period of inactivity. The unlock duration setting
specifies that period in minutes.
The user can go to the \Panel Lock\Admin Setup\ folder to clear the password without waiting for the Unlock
Duration inactivity timer to expire by unlocking and re-locking the panel.
Panel Lock remains locked after cycling power. Note that the Panel Lock feature only locks the panel. All
TCP/IP, RS-232 and IEEE 488 communications are unaffected by Panel Lock.