Specifications

Synergy Nano Technical Manual, Revision -
Page 138
7.0 MAINTENANCE DIRECTORY
Machine
Inputs
Alarms Channel PIDs About File Utilities
Date and Time
Sub-folders & Screen Editors
 Machine Inputs  Alarms  Channel PIDs
(Screen Editor) (Screen Editor) (Screen Editor)
PSI Values
♦ Low Stage Compressor
- Low Press
♦ Low Stage Compressor
- High Press
♦ High Stage Compressor
- Low Press
♦ High Stage Compressor
- High Press
Note: Disregard “Temperature -
Bad Sensor” if sensors aren’t
connected
Clear Alarm Screen
Lists the following:
♦ Time
♦ Alarm
♦ Ack
♦ Cleared
Select an alarm and press the Ack
Alarm button at top of the screen to
acknowledge the alarm. The entry
will be removed from the list when
the alarm condition is eliminated.
Select Ch1, Ch2, or Ch3 to show the
Heat / Cool and Humidify /
Dehumidify PID Values. The values
displayed are:
♦ Pn, In, Dn, PID, Err, Last Err,
Delta Err, P.B., Reset, Rate
The screen also shows Setpoint and
Actual values for each channel
selected.
 About  File Utilities  Date and Time
(Screen Editor) (Sub-folders) (Screen Editor)
 Copy Files
 Delete Files
 Rename Files
 Export History
 Clear History
 Export Screenshots
 Upgrade Software
 Copy Files
Screen Editor: Enter or select
Source File & Destination File
 Delete Files
Screen Editor: Enter or select file to
delete
 Rename Files
Screen Editor: Enter or select
Original & New File Name
 Export History
Screen Editor: Export the current
history file
 Clear History
Screen Editor: Clear the current
history file.
♦ Software Revision Information
Screen and unit Serial Number
 Export Screen Shots
Wizard used to export screenshots.
♦ Select / view date and time