Specifications

Synergy Nano Technical Manual, Revision -
Page 139
7.1 Operator Interface
The Maintenance Directory provides a set of utilities that are used for the operation and maintenance of the
chamber. Go to Section 7.2 Maintenance: Alarm Functions
for specific information on Alarms.
Maintenance Directory
Press the MAINT button to access the following
functions.
♦ Machine Inputs (Compressor Pressures)
♦ Alarms (Clearing an Alarm)
♦ Channel PIDs (PID variables in real-time)
♦ About Synergy Nano
♦ File Utilities
(Copy Files, Export History)
♦ Date and Time (Adjust)
Machine Inputs #1 thru #8
If your chamber is equipped to monitor machine
inputs*, this screen displays the Low and High
compressor’s suction and discharge pressures in
PSIG. See Low Res Inputs in the Calibration and
Events screens.
* These temperature and pressure “Machine
Inputs” transducers are optional. Disregard Bad
Sensor Readings message when sensors are not
connected.
To log the Machine Inputs, see Section 6.11 Setup:
Logging.
Date and Time
Adjust the date and time as necessary and press
the Apply button.