Specifications

Synergy Nano Technical Manual, Revision -
Page 151
Required hardware list:
♦ Windows based PC
♦ Voltmeter or digital multimeter, preferably 6 digits
♦ High value resistor (255 ohm nominal) and Lo value resistor (62 ohm nominal) *
♦ Serial Cable
♦ Gender chamber for serial cable
♦ Voltage source 4.0/1.0 volts (optional) – the Olympic board’s DAC 1 output may be used to provide a
source voltage.
* Tidal Engineering offers a Calibration Kit
(PN TE1677) to assist with Synergy Nano
calibration. The kit contains several
hardware calibration connectors and
communication cables as indicated above
by an asterisk. The kit also contains a
calibration cable for easy serial
communications and a DAC connector
pre-wired for calibration without a voltage
source.