Specifications

Synergy Nano Technical Manual, Revision -
Page 171
Press Register to continue.
The Synergy Nano will display a message box
indicating that the web server key was successfully
registered.
Press OK to proceed to the Web Server Settings
page.
Once you have successfully registered the web
server, you can now enable the Web Server.
You should also set a Login Name, and set a
Password before you connect to the Synergy Nano.
First change the Web Server On/Off value to
Enabled. .
Press the Back button to return to the settings
window.
Network Security
In today’s Internet environment, network security is
often a concern. The Synergy WebTouch Remote
web server requires a username and password that
is managed from the touch screen. To set the user
name and password, select Web Server Login
Name and press the Change button. Enter your
desired Login Name on the keypad. Press OK to
return to the settings window. Repeat the process
for the Web Server Password. You will use this
name and password when you access the Synergy
Nano remotely via your web browser.
The unit’s web server is now ready for use.