Specifications

Synergy Nano Technical Manual, Revision -
Page 173
Accessing the Synergy Nano via the Web
To access the controller via the web, open Internet Explorer and type your controller’s IP address in the
address bar. You can find the controller’s IP address in the Web Server folder under the COMM button.
For example, if the Web Server Address on the controller is 170.23.10.10 then type “170.23.10.10” in
Internet Explorer’s address bar.
After entering the address, press Enter to navigate to your controller. The next screen you will see is the
Internet Explorer Network Password screen.
Enter the user name and password you specified in the Web Server Folder on the controller. You may want
to check the Save Box to save the name and password in your computers password list. If you don’t save
the password you will be prompted for a password each time you open a new session. After you have
successfully logged in, you will see the web interface exactly as it appears on the controller.
Note: If you enter the incorrect password, shutdown the Internet Explorer window and re-start it. Otherwise
Internet Explorer will not ask for the password again.
Using the Web Interface
The Synergy Nano Web Interface virtually identical to the Synergy Nano Touch Screen interface. It displays
the same buttons as on the physical controller and the main screen is identical to the touch screen on the
Synergy Nano. Use the mouse pointer as you would use your finger on the touch screen. At each click, the
screen accepts your command and automatically refreshes. If you want to refresh the screen, without
initiating any action, click on the blue title bar, which is neutral area and will have no effect on the operation
of the chamber.