Specifications

Synergy Nano Technical Manual, Revision -
Page 190
Supported Controllers
Synergy Manager currently supports these process controllers with the software / firmware hardware revision
levels shown in following table. The table also lists the communication methods supported for each
controller and the protocol form. GPIB communications support for the controllers listed is provided by ICS
Electronics’ 4804A / 09A GPIB to Serial Interface and Tidal Engineering’s Synergy488 Module except for
Synergy Nanos which offer built-in support GPIB communications.
Ethernet support for VT3, P1460, W942, and WF4 provided by Tidal Engineering’s Synergy488 Module
(ASCII).
Supported Controllers Table
Controller
Type
Short
Name
Communication
Method
Protocol or
Flow Control
VersaTenn 3
VT3 RS232 Xon/Xoff
IEEE-488 GPIB
Synergy488 TCP/IP TCP/IP
VersaTenn 4
VT4 RS232 Modbus
IEEE-488 GPIB
VT5 RS232 None
IEEE-488 GPIB
Ethernet-TCP/IP TCP/IP
Synergy/
VersaTenn V
W942 RS232 Xon/Xoff
IEEE-488 GPIB
Synergy488 TCP/IP TCP/IP
Watlow 942
WF4 RS232 Modbus
IEEE-488 GPIB
Synergy488 TCP/IP TCP/IP
Watlow F4
T4800 RS232 RTS Hardware Handshaking
Thermotron 4800
P1460 RS232 Modbus/RS485
RS485 Modbus/RS485
IEEE-488 GPIB
Synergy488 TCP/IP TCP/IP
Partlow 1460/1462
Y750 RS232 PC Link No Checksum
RS485 PC Link No Checksum
Synergy488 GPIB/IEEE-488 GPIB
Synergy488 TCP/IP TCP/IP
Yokogawa 550/750