Specifications

Synergy Nano Technical Manual, Revision -
Page 208
♦ Drop down the Drive List to select the drive
as shown at left.
Note: The Storage Card is the Synergy Nano’s
internal Flash memory.
♦ Select the desired file from the File List that
appears.
♦ Press the Open button. The Program screen
will appear with the listing of your file. Open
the Run screen to start running your
program. See Section 9.7 Programming the
Synergy Nano: Running a Program for
details.
9.2 Creating a New Program: Add Step Wizard Feature
The Add Step Wizard is the step-by-step guide that the Synergy Nano provides for adding and inserting
program steps. Each setup function is defined with on-screen instructions. You may cancel the Add Step
Wizard at any time and return to the main Program screen.
To create a new program, first press the New File button. If a file is already open, a window
will appear as shown above in Section 9.1
. For the purpose of demonstration, to add a
setpoint step, press the Add Step button and proceed as shown below in the Add Step
Wizard demonstration.
Add Step Wizard Walkthrough:
1. Start Æ
2. Select Add Step or Insert Step Æ