Specifications

Synergy Nano Technical Manual, Revision -
Page 214
9.5 Copying, Editing and Deleting a Step
To Copy, edit or delete a step, first press the appropriate button at the top of
the Program screen. The Edit Step Wizard will guide the user through each
of these functions
♦ Copy Step: Select the step you wish to copy. The Wizard will ask whether you wish to copy this step
at the end of the program, or if you wish to insert this step somewhere within the program. To insert
the step within the program select the step that you want it inserted before.
♦ Edit Step: Select the step you wish to edit. The Edit Step Wizard will guide through step editing.
Step editing is the same procedure used by the Add Step Wizard.
♦ Delete Step: The Wizard will ask you if you are sure you wish to delete the current step. If you wish
to delete a different step within the program, answer No, select the step, and then press the Delete
button again.
9.6 Saving a Program
To Save your program, press the Save File button at the top of the Program screen. The
Save As function with a Drive List / File List screen will appear.
♦ Press the Save File button at the top of the Program screen. The Drive List / File List screen will
appear.
♦ Select the Drive List from the drop-down menu. You can save the program to the Storage, the Floppy
Drive*, or USB Hard Disk. (*Floppy option is available on Synergy Compact and Synergy V units)
♦ To enter a new file name, press the File entry text box at the bottom of the screen. The T9
alphanumeric keypad appears. Enter the desired program name and press the OK button.
9.7 Running a Program
Press the RUN Screen button to open
the Run screen. From the Run screen you can,
Start, Stop and Pause a program.
Any file loaded in the Program screen will appear in
the Run screen when the Run screen is opened.