Specifications

Synergy Nano Technical Manual, Revision -
Page 221
Event Board Options
Tidal Engineering Corporation offers three types of event output boards: standard AC output (TE1151-6),
universal output (TE1616-6) and relay output (TE1708-6). Each of these connects to the Olympic board or to
the 2SM board with a 20 position ribbon cable. Schematic diagrams for these are included in this section
and wiring instructions are included in the Installation Section 17.0
.
Description Product Image
Triac Output Board, 6 Channel
P/N TE1151-6
• Control up to twelve (6) 3 Ampere AC loads
• 110 - 220 VAC
• Each output can also drive an external Triac for
larger loads.
Relay Output Board, 6 Channel
P/N TE1708-6
• Control up to six (6) 3-Ampere AC loads,
• 110 - 220 VAC.
• Each output is Form C with both a normally open
and normally closed contact.
Universal Event Board, 6 Channel
P/N TE1616-6
• This unit is interchangeable with the standard 6-
Channel Triac Output board but its outputs can
configure for DC loads as well as AC loads. This
Event board is configured by installing standard
OPTO22 output modules in the sockets. These
modules are available separately
• AC Output modules are available for 140 and
280 VAC and 3.5 Amps.
• DC Output modules are available for 60 VDC and
3.5 Amps.
20 Pin Cable
P/N TE1722-20-6ft
34 Pin Cable
P/N TE1722-34-6ft