Specifications

Synergy Nano Technical Manual, Revision -
Page 222
Synergy Nano Event Setup Instructions
There are several ways to control the events on the Synergy Nano. You can control them locally through the
touch panel, through remote software such as the Synergy Manager software or within a chamber profile.
The instructions that follow describe how to test the event output board by operating the Synergy Nano
locally) from the touch screen) in Manual Mode.
First, press the On button on the right navigation panel of the Synergy Nano.
Next press the Events button on the lower navigation panel on the Synergy Nano.
Events Folder
Select the Events Output folder on the touch
screen.
Example 1
Check the desired outputs to turn on and press the
Apply button.
Example 1: Turn on Events 2, 4 and 6.
Events 2, 4 and 6 On
When outputs 2, 4 and 6 are selected and turned on
the event board LEDs 2, 4 and 6 are lit.