Specifications

Synergy Nano Technical Manual, Revision -
Page 223
11.2 UUT Temperature Module (Unit-Under-Test)
UUT Introduction
The UUT Module (Unit-Under-Test) is a 16-channel thermocouple data acquisition unit. Developed to expand
the input capabilities of the Synergy Nano, the UUT module captures and logs data from the test. Up to four
modules can be attached to the Synergy Nano providing up to 64 thermocouple inputs. The UUT data can
optionally be logged and the log file may be used for analysis, graphing and reporting. The Synergy Nano’s
UUT window, shown below, displays the temperature readings from the UUT module.
UUT Temperatures
See Section 13.0 UUT Module (Unit Under Test)
Data Acquisition for a more detailed discussion of
the UUT module and its capabilities.
11.3 Digital Outputs
Digital Outputs
LEDs indicate the status of 32 Digital Outputs.
♦ Grey LED: Function Off
♦ Red LED: Function On (On/Off type)
♦ Yellow LED: Function On (Time
Proportioning)
The information bar at the bottom indicates the
output designation and the status of the selected
output.
The Digital Outputs window displays the on/off/time proportioning states of the controller’s digital outputs.
These outputs control the chamber’s mechanical devices, such as compressors and heaters. This screen
also displays the event states, alarm states and the percent heating and cooling requested from the heating
and cooling devices.
Percentage output values between 101 and 199 indicate that an output is set to instantaneously mirror the
indicated output. For example, say Output 3’s time proportioning value is 112%. Output 3 is actually
mirroring output 12. Percentage outputs between 201 and 199 indicate that an output is the complement of
the indicated output. For example, Output 3’s time proportioning value is 218%. Output 3 is thus
instantaneously the opposite of output 18.