Specifications

Synergy Nano Technical Manual, Revision -
Page 228
13.0 UUT MODULE, UNIT UNDER TEST DATA ACQUISITION
13.1 UUT Overview
The UUT Module (Unit-Under-Test) is a 16-channel thermocouple data acquisition unit. Developed to expand
the input capabilities of the Synergy Nano, each UUT module allows system operators to capture and log
temperature data from the unit-under-test and other pertinent test temperatures. Up to four modules can be
attached to the Synergy Nano providing up to 64 T-Type thermocouple inputs. The UUT data can optionally
be logged and the log file may be used for analysis, graphing and reporting.
UUT Module Uses
The UUT module can be used to monitor and record multiple air temperatures and multiple product
temperatures and can control from any one of these.
UUT modules are particularly useful when testing products with a large thermal mass whose temperature is
slow to change. When used in conjunction with the Synergy Nano’s Cascade control feature, the user can
program the chamber to ramp to temperature setpoints and Waitfor product temperature instead of the
chambers air temperature.
UUT Module
UUT Temperatures
For UUT Modules 1 thru 8, this screen shows
actual temperature readings of Sensors 1 thru 8
for each UUT.
Select UUT 1 thru UUT 8 with Next or Previous
buttons.
These values may be logged. See Section 6.11
Setup: Logging.