Specifications

Synergy Nano Technical Manual, Revision -
17.5.1 Ethernet Connection
The X6 connection on the back of the Synergy Nano provides the RJ-45 connection for 10/100 BaseT
networks.
In most applications, a bulkhead mounted Ethernet cable provides a convenient method to provide access to
the Ethernet port from the outside of the equipment. The bulkhead mounted Ethernet jack (P/N TE1770-
03C) is shown below.
Typical Installation
P/N TE1770-06C
Alternatively, a standard CAT5 Ethernet cable can be used to connect the Synergy Nano to a Network port
or an Ethernet Switch or Hub.
A crossover CAT5 Cable (P/N TE1776-06C) can also be use to connect directly to the Ethernet port on a PC
or Laptop.
Crossover TE1776-06C Patch Cable TE1775-06C