Specifications

Synergy Nano Technical Manual, Revision -
Most of the Synergy Nano Plus input and output wiring is made at the Olympic board. The following image
of the Olympic Board identifies the connectors on the board and their principal functions. In addition a
connection diagram follows that identifies the detailed pin-out of the P1 thru P4 input/output connectors.
Olympic Board
Note: The Boost Heat output must be wired in series with the PID Heat output and not wired to control the
Boost Heaters directly.
P6 (3SM)
Events Outputs
P7 (SSR)
Humidity Outputs
P5
Main Outputs
P9 (PIN 1)
Power Input
P8
RS-485
RS-232
P13
Internal
Comm. to
Console
P10
GPIB
P2 (PIN 1)
16-Bit Conv.
Two RTDs
Five 0-5 V Inputs
P4 (PIN 1)
Eight 10-Bit 0-5V Inputs
Two 10-Bit 0-5V Outputs
P1 (PIN 1)
Ten Digital
Inputs
P3 (PIN 1)
Six Digital Inputs
Two Alarm
Contacts