Specifications

Synergy Nano Technical Manual, Revision -
Page 293
17.7 Event Output Board Wiring
The event board connects directly to the Synergy Nano or interchangeably to either of Synergy Nano Plus
outputs, the 20-pin P6 connector on the Olympic board, the J5 connector on the 1SM 12 channel output
board.
To connect the event board to the Synergy Nano:
1. Connect one end of the 20 pin cable to the 20 pin connector (J2) on the event output board.
2. Connect the other end of the 20 pin cable to the 20 pin connector on the back of the Synergy Nano
(X4). See the figure below.
Event Board Connected Directly to Synergy Nano
To connect the event board to the Synergy Nano via the 12 channel 1SM output board:
1. Connect one end of the 20 pin cable to the 20 pin connector (J2) on the event output board.
2. Connect the other end of the cable to the 20 pin connector (J5) on 12 channel 1SM output board.
Event Board Connected via 12 Channel 1SM Output Board
X1
Power
and Main
Out
p
uts
X2
Digital I/O
X3
Analog I/O
X4
Event
Board
(Optional)
X5
UUT
Comm.
X6
10/100
Ethernet
X7
USB
Device
X8
RS-232
Serial