Specifications

Synergy Nano Technical Manual, Revision -
Page 298
18.0 SYNERGY NANO COMMUNICATIONS
18.1 Synergy Nano Command Set
Tidal Engineering Corporation © 2007
File: SYNERGY COMM CMDS REV 2.6.10
Visit www.tidaleng.com to look for and download the most recent command set.
Description Command Root Command
Usages
Command Syntax Range,
Units
Command
Example
Response Example
Setpoint 1 SP1 SP1 Set = SP1 X.X Range = R1L - R1H C / F = SP1 100.7 OK
SP1 Query ? SP1 Range = R1L - R1H C / F ? SP1 100.7
Setpoint 2 SP2 SP2 Set = SP2 X.X Range = R2L - R2H C / F / %RH = SP2 75 OK
SP2 Query ? SP2 Range = R2L - R2H C / F / %RH ? SP2 75.0
Setpoint 3 SP3 SP3 Set = SP3 X.X Range = R3L - R3H C / F / %RP = SP3 Off OK
SP3 Query ? SP3 Range = R3L - R3H C / F / %RP ? SP3 Off
Channel 1
Actual
C1 C1 Query ? C1 Range = R1L - R1H C / F ? C1 25.0
Channel 2
Actual
C2 C2 Query ? C2 Range = R2L - R2H C / F / %RH ? C2 50.0
Channel 3
Actual
C3 C3 Query ? C3 Range = R3L - R3H C / F / %RP ? C3 Off
Chamber On ON On Set = ON OK = ON OK
On Query ? On 1 if On, 0 if Off ? On 0
Chamber Off OFF OFF Set = OFF OK = OFF OK
Run Query ? RUN Returns:
0 - Stop
1 - Run
2 - Pause
3 - Steady State
? RUN 0
Pause
Program
HOLD HOLD Set = HOLD OK = HOLD OK
Resume
Program
RSUM RSUM Set = RSUM OK = RSUM OK
Run From RUNFROM RUNFROM Set = RUNFROM Range = Step 1 - Last Step = RUNFROM 5 OK
Software
Revision
*IDN *IDN Query *IDN ? Returns Revision Info: Make, Model,
Serial #, Version
*IDN? Tidal Engineering, Synergy
Controller,Serial-13/0137,Version
2.6.8
Enable/Disabl
e UUT
Monitoring
UUT UUT Set = UUT ARG1 ARG2 ARG1 = UUT # (1 - 8)
ARG2 = 0/1 (Enable / Disable)
= UUT 1 1 OK