Specifications

Synergy Nano Technical Manual, Revision -
Page 336
18.2 SimpleComm Examples
The following examples use screenshots to demonstrate Synergy Nano command and response with the free SimpleComm application available at
www.Tidaleng.com/download.htm
. See section 8.3 for detailed instructions for SimpleComm.
Example 1
This example demonstrates the “? C1”
command which is used to query chamber
temperature.
To setup this example we performed the
following steps.
1. Connect the Synergy Nano to the Local
Area Network (LAN) with an RJ-45
network cable.
2. Obtain the IP address of the Synergy
Nano from the COMM/Ethernet Folder.
3. Enable the Synergy Nano’s TCP/IP
server from the COMM/TCP\IP Server
folder.
4. Enter the address of the controller (From
step 2) into the SimpleComm Address
field and press Connect Button.
5. Enter “? C1” in the Command field.
Note the space between “?” and “C1”.
6. Press the Send button and note the
temperature in Response field.
Note: The response is in the current
units of measure for the controller.