Specifications

Synergy Nano Technical Manual, Revision -
Page 49
Maintenance Screen Description
The PID Settings screen is used to edit the constants that control the PID algorithms. In general, PID
adjustment should only be performed by a qualified technician. If you would like to know more about PIDs
we have included a brief tutorial below. For more information on PID control refer to a resource book
dedicated to the subject.
To modify your PID settings, navigate to Setup \ PID
Settings. Then select the desired channels PID
folder.
Select the Heat PID, Cool PID or Dead Band folder.
Within the Heat or Cool PID folders are settings for:
♦ Prop. Band Heating
♦ Reset Channel n Heating
♦ Rate Channel n Heating
♦ Cycle Time for Ch n Heating
♦ Rate Band for Ch n Heating
These settings are discussed in greater detail on
the following pages.
n is the Channel of interest.