Technical information

3/39

1SDC210033D0202

Ekip Connect

Installation and diagnosis software for ABB SACE products with Modbus RTU communication. The

software can be used during the commissioning stage, or for troubleshooting in an up and running

communication network.

Ekip Connect automatically scans the RS-485 bus, detects all the devices connected and checks

their conﬁguration, checking all the possible address, parity and baud rate combinations. A simple

click over SCAN will highlight:

devices that fail to respond;

conﬁguration errors;

incorrect addresses and parity;

any wiring errors (with the SACE electronic trip unit);

thus achieving a complete diagnosis of the communication network.

Thanks to this friendly program, the Modbus communication network installation is very easy.

Ekip Connect is distributed free of charge and can be downloaded from the BOL web site

(http://bol.it.abb.com).