Parts Manual TURBO COLLECTORS TURBO GRASS COLLECTOR ATTACHMENTS FOR TRACTORS & RIDERS 38” TURBO COLLECTORS Mfg. No. Description 1692626 1692714 1693225 1693226 38” Regent / 500 / 2500 38” Broadmoor / 1600 / 2600 38” Regent / 500 / 2500 & ZT Series 38” Broadmoor / 1600 / 2600 44” TURBO COLLECTORS 48” TURBO COLLECTORS Mfg. No. Description 1692936 48” Legacy / 2000 / 2900 50” TURBO COLLECTORS Mfg. No. Description 1692716 50” Landlord / 1700 / 2700 Mfg. No.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.
Table of Contents This Manual Covers The Following Products: 38” TURBO COLLECTORS PAGES 1692626 38” Regent / 500 / 2500 1692714 38” Broadmoor / 1600 / 2600 1693225 38” Regent / 500 / 2500 & ZT Series 1693226 38” Broadmoor / 1600 / 2600 2, 4, 6, 8, 16, 18 44” TURBO COLLECTORS PAGES 1692715 44” Broadmoor / 1600 / 2600 & 44” Landlord / 1700 / 2700 Series 1692858 44” Regent / 500 / 2500 1693106 44” ZT Series 1693227 44” Broadmoor / 1600 / 2600 & 44” Landlord / 1700 / 2700 Series 10, 12, 14, 16, 20, 22
Turbo Blower Assembly - 38” Regent / 500 / 2500 Series A-AT42401 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. 29 9 37 31 12 28 11 31 31 31 38 15 22 Mounting holes for 38" Turbo Bracket Assy., Ref. No. 18 2 35 29 4 32 1 4 33 22 31 8 1 26 32 5 20 24 19 32 14 25 6 7 10 21 27 30 23 16 Ref. No.
Turbo Blower Assembly - 38” Regent / 500 / 2500 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 PART NO. QTY.
Turbo Blower Assembly - 38” Regent / 500 / 2500 Series A-AT42402 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 16 NOTE: All original mower deck parts are shown as phantom parts. 6 18 11 20 20 25 1 3 7 20 14 15 22 26 19 2 24 12 5 13 10 8 9 23 21 4 The above parts group applies to the following Mfg. Nos.: 1692626 Turbo, 38” © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved.
Turbo Blower Assembly - 38” Regent / 500 / 2500 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART NO. QTY. 172845 1670578 1704768 1704881 1705066 1705141 1705716 1713091 1713621 1713624 1714817 1715018 1931337 1916950 1916965 1917356 1917372 1921971 1923362 1924940 1930600 1931277 1931333 1933468 1933896 1960404 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 3 2 2 2 1 4 4 DESCRIPTION BELT STOP KNOB BRACKET, Idler, Turbo BRACKET ASSY., Cut-off PIVOT ASSY.
Turbo Blower Assembly - 38” Regent / 500 / 2500 & ZT Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart. A-AT42403 29 9 NOTE: All original mower deck parts are shown as phantom parts. 37 31 12 28 11 31 31 31 38 15 22 Mounting holes for 38" Turbo Bracket Assy., Ref. No. 18 2 35 29 4 32 1 4 33 22 31 8 1 26 32 5 20 24 19 32 14 25 6 7 10 21 27 30 23 16 Ref. No.
Turbo Blower Assembly - 38” Regent / 500 / 2500 & ZT Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 PART NO. QTY.
Turbo Mounting Group - 38” Regent / 500 / 2500 & ZT Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 33 11 9 8 A-AT42404 34 NOTE: All original mower deck parts are shown as phantom parts. Torque to 55-70 ft. lbs.
Turbo Mounting Group - 38” Regent / 500 / 2500 & ZT Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 PART NO. QTY.
Turbo Blower Assembly - 44” Regent / 500 / 2500 & ZT Series NOTE: All original mower deck parts are shown as phantom parts. A-AT42405 29 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 9 37 31 12 28 Mounting holes for 44" Turbo Bracket Assy., 31 11 31 31 38 15 22 32 2 35 4 22 32 1 4 33 31 8 1 26 32 5 20 24 19 35 29 10 14 7 30 23 3 6 16 Ref. No.
Turbo Blower Assembly - 44” Regent / 500 / 2500 & ZT Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 PART NO.
Turbo Mounting Group - 44” Regent / 500 / 2500 Series A-AT42406 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 7 12 9 10 6 NOTE: All original mower deck parts are shown as phantom parts.
Turbo Mounting Group - 44” Regent / 500 / 2500 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 PART NO. QTY.
Turbo Mounting Group - 44” ZT Series NOTE: Unless noted otherwise, use the standard hardware torque specification chart. A-AT42407 NOTE: All original mower deck parts are shown as phantom parts.
Turbo Mounting Group - 44” ZT Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 PART NO. QTY.
Turbo Blower Assy - 38” & 44” Broadmoor / 1600 / 2600, 44” & 50” Landlord / 1700 / 2700 A-AT42408 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. Mounting Holes for 44” & 50” Turbo Bracket Assy, Ref. No. 20 Mounting Holes for 38” Turbo Bracket Assy, Ref. No. 20 (38”) (44”) Mounting Holes for 38” Turbo Mounting Holes for 44” & 50” Turbo The above parts group applies to the following Mfg. Nos.
Turbo Blower Assy - 38” 44” 50” Broadmoor / 1600 / 2600, Landlord / 1700 / 2700, & ZT REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 PART NO. QTY.
Turbo Mounting Group - 38” Broadmoor / 1600 / 2600 Series A-AT42409 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Stacked Pulley Ref. No. 2 is for use on early style mower decks with splined arbor shafts. NOTE: All original mower deck parts are shown as phantom parts. 8 9 11 Torque to 55-70 ft. lbs.
Turbo Mounting Group - 38” Broadmoor / 1600 / 2600 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 PART NO. QTY.
Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series A-AT42410 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Stacked Pulley Ref. No. 46 and capscrew Ref. No. 47 are for use on early style mower decks with splined arbor shafts. NOTE: All original mower deck parts are shown as phantom parts.
Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 PART NO. QTY.
Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series A-AT42411 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. Stacked Pulley Ref. No. 49 and capscrew Ref. No. 48 are for use on early style mower decks with splined arbor shafts. 12 48 Torque to 55-70 ft. lbs.
Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 PART NO. QTY.
Turbo Mounting Group - 50” Landlord / 1700 / 2700 Series A-AT42412 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Stacked Pulley Ref. No. 44 and capscrew Ref. No. 43 are for use on early style mower decks with splined arbor shafts. NOTE: All original mower deck parts are shown as phantom parts.
Turbo Mounting Group - 50” Landlord / 1700 / 2700 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 PART NO. QTY.
Turbo Blower Assembly - 48” Legacy / 2000 / 2900 Series A-AT42413 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. Slide Under Wing Nut 39 Upstop Capscrew Place Over Nut Bracket Capscrews Mounting Plate - 48” Models 40 38 The above parts group applies to the following Mfg. Nos.: 1692936 Turbo, 48” © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved.
Turbo Blower Assembly - 48” Legacy / 2000 / 2900 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PART NO. QTY.
Turbo Mounting Group - 48” Legacy / 2000 / 2900 Series A-AT42414 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. Belt Routing 20 Capscrew Ref. No. 4 The above parts group applies to the following Mfg. Nos.: 1692936 Turbo, 48” © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved.
Turbo Mounting Group - 48” Legacy / 2000 / 2900 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 PART NO. QTY.
Turbo Blower Assembly - 60” Legacy / 2000 / 2900 Series A-AT42415 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. 39 38 40 Slide Under Wing Nut Upstop Capscrew Place Over Nut Bracket Capscrews Mounting Plate - 60” Models The above parts group applies to the following Mfg. Nos.: 1692937, Turbo, 60” © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved.
Turbo Blower Assembly - 60” Legacy / 2000 / 2900 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PART NO. QTY.
Turbo Mounting Group - 60” Legacy / 2000 / 2900 Series A-AT42416 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. NOTE: All original mower deck parts are shown as phantom parts. Belt Routing 14 Capscrew Ref No. 3, Page 26 The above parts group applies to the following Mfg. Nos.: 1692937, Turbo, 60” © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved.
Turbo Mounting Group - 60” Legacy / 2000 / 2900 Series REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 PART NO. QTY.
Part Number Index by Page Number Part No.
Part Number Index by Page Number Part No.
Part Number Index by Page Number Part No.
Hardware Identification & Torque Specifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Washer Hardware Grade Lockwasher Carriage Bolt No Marks SAE Grade 2 Hex Nut Size Of Hardware Standard Hardware Sizing 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 When a washer or nut is identified as 1/2”, this is the