(The chances are you’re never going to read me) Owner’s Manual S20E and S20ENT www.SimplicityVac.
Contents Getting Started I mportant Safety Instructions ............................................................................. Polarization Instructions...................................................................................... State of California Proposition 65 Warnings ...................................................... Description of the Vacuum ................................................................................ Assembling the Vacuum ......................................
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE he manufacturer cannot accept responsibility for damage IMPORTANT: Tcaused when the appliance is not used according to the instructions or for uses other than those for which it was intended. To reduce the risk of fire, electric shock or injury: • Do not leave appliance when plugged in.
Polarization Instructions POWER CORD, 2-WIRE POLARIZED CORD To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet.
Description of the Vacuum 1 13 6 2 14 7 3 8 9 10 4 5 11 4 12
Description of the Vacuum 1 Ergonomic Handle 2 Carrying Handle 3 Bag Compartment Cover (to Replace Vacuum Bag) 4 Vacuum Nozzle 5 Furniture Guard 6 Power Cord 7 Main On/Off Power Switch 8 Suction Control Dial 9 Combination Dusting/Upholstery Brush (Model S20E) 10 Crevice Tool (Model S20E) 11 Handle Release Pedal 12 Thermal Motor Protection Reset Button 13 Quick Release Upper Cord Hook 14 Ready Reach™ Tools (Model S20E) 5
Assembling the vacuum Attaching The Handle To The Vacuum The vacuum cleaner and the handle are packed separately. • After first removing the handle screw, position the handle behind the vacuum cleaner and level with the top of the unit. Hold the power cord down and away from the vacuum while the handle is being attached. • On the bottom of the handle are two “T-shaped” rails that slide forward onto two guides located on the top of the vacuum cleaner.
Operation Unwinding the Power Cord • The upper cord hook rotates to allow for quick access to the power cord. Turning the Vacuum On/Off • To start the vacuum cleaner, flip the “on/off” switch located on the side of the bag compartment to the “on” position as indicated on the switch. • To stop the vacuum cleaner, flip the “on/off” switch to the “off” position as indicated on the switch. • Turn the vacuum cleaner off before unplugging from the electrical outlet.
Operation Vacuuming Under Furniture Your Simplicity Symmetry will lie flat on the floor for effective cleaning under beds and tables (Fig. 1). • Press the foot pedal release once for normal vacuum cleaning (Fig. 2). • Press the foot pedal release a second time to enable the vacuum to lay flat on the floor (Fig. 3). Fig. 1 Fig. 2 Fig.
Operation Carrying the Vacuum To safely transport your vacuum, especially when carrying the vacuum up and down stairs, use the carrying handle. Carpet Height Adjustment Your Simplicity upright vacuum cleaner is designed with an automatic self-adjusting rug nozzle. No manual adjustments are required. The height of the rug nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature allows the rug nozzle to float evenly over all carpet pile surfaces.
Attachment Cleaning Wand Cleaning Model: S20E With the on-board cleaning tools and vacuum wand, your Simplicity Symmetry becomes a comprehensive cleaning system. The model equipped with on-board tools includes an upholstery tool, dusting brush, crevice tool, extension wand and stretch hose. • Remove the telescopic wand from the body of the vacuum. Unlock the wand collar (located on end of wand), extend the wand and re-lock the wand collar.
Attachment Cleaning Ready Reach™ Cleaning tools Model: S20E Your vacuum is equipped with a dusting brush, upholstery brush and crevice tool. Other tools are available at your Authorized Simplicity Retailer. • Remove the cleaning wand from the vacuum. • Insert any of the tools onto the end of the wand. Dusting Brush: Wand with Dusting Brush I deal for table tops, shelves, blinds or hard surface floors. Upholstery Tool: I deal for soft surfaces like chairs and couches.
Attachment Cleaning Adjusting the Suction Power for Tool Cleaning On the back of the vacuum, locate the suction control dial and turn it to the desired position. This reduces the suction power coming through the hose. Close the suction control dial when finished to restore full suction power.
Attachment Cleaning Optional Cleaning Tools All Simplicity Symmetry vacuum cleaners offer an attachment port that enables you to insert optional cleaning tools (available through your Simplicity Retailer). Should you have carpeted stairs, for example, it is highly recommended to use one of the two kits pictured, since each offers either a 12- or 15-foot hose for safe stair cleaning. These kits are effective overall cleaning tools to address some of the hard to reach areas of your home or car.
Attachment Cleaning Connecting the Optional Attachment Hose to the Vacuum Cleaner Pull out and open the suction control dial by turning the lid located on the back of the vacuum cleaner. Insert the soft, rubber end of the hose into the cleaning attachment opening. Push in while twisting the hose end to ensure the hose is fastened securely. NOTE: You can connect any of the cleaning tools to the end of the extension wand(s) and twist for a secure fit.
Maintenance and Care Replacing the Vacuum Bag • Open the bag compartment lid. • Remove vacuum bag by pulling the bag collar off the bag holder. • Attach the new vacuum bag onto the bag holder. • Tuck the bag corners into the vacuum before replacing the bag compartment lid. • Replace the lid and press onto the vacuum until it snaps into place.
Maintenance and Care When to Change the Filters At minimum, it’s recommended to replace the filters once a year or after using 12 vacuum bags, whichever comes first. If someone in your household is highly sensitive to airborne allergens, it is recommended to change the filter set after every six vacuum bags. Replacing the Foam Post Filter • Open the bag compartment lid and locate the filter on the inside of the lid. • Remove the used filter from the lid. • The foam filter can be washed and reused.
Maintenance and Care Replacing the Foam Secondary Filter The secondary filter protects the motor from dust and dirt. Before installing a new vacuum bag, check the filter. Accumulated dirt in the bag compartment will be collected on this filter and may restrict motor performance when the filter becomes dirty. • Open the bag compartment lid and locate the secondary filter on the bottom of the bag compartment. • Remove the secondary filter from the bottom of the bag compartment.
Maintenance and Care Removing and Reinstalling the Bottom Plate WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. • Press the handle release pedal twice and place the vacuum cleaner in the flat position. • Turn the vacuum cleaner over, exposing the bottom plate. • Slide the two locking latches toward the center. • Press the tabs inward on each side and remove the bottom plate.
Maintenance and Care Replacing the Agitator Belt NOTE: To ensure maximum cleaning efficiency, the condition of the belt should be checked regularly. If the belt is stretched, cracked or if excessive slipping is occurring, replace the belt. • Unplug the vacuum cleaner from the electrical outlet. • Turn the unit over and remove the bottom plate (See "Removing and Reinstalling the Bottom Plate") (Fig. 1). • Remove the agitator and worn or broken belt. Fig.
Maintenance and Care Edge Cleaning The edge cleaning feature provides for improved cleaning of carpets near walls and stationary furniture. For maximum edge cleaning, place the right side of the nozzle against the wall or furniture. Annual Checkup Reminder To keep your vacuum in peak operating condition, it is recommended you bring your vacuum to an Authorized Simplicity Retailer for an annual checkup.
Problem Solving Guide Unclogging the Nozzle and Hose WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. The hose located on the back of the vacuum carries the dirt from the nozzle to the vacuum bag. The hose also functions as the attachment cleaning hose. First check to see that a bag is properly installed. If the Hose Should Become Clogged • Pull out and turn the lid of the cleaning attachment opening. Remove the clog or blockage.
Problem Solving Guide Thermal motor protection Your Symmetry is equipped with a safeguard to recognize when the vacuum heats up and shuts itself down to protect your vacuum cleaner. Common reasons why a vacuum may overheat include operating a vacuum with a full bag or when there is a clog in the vacuum. • Unplug the vacuum. • Inspect your vacuum for a full bag condition or a hose clog and correct the problem. • Locate the Thermal Motor Reset button on the back of the vacuum.
Problem Solving Guide Troubleshooting WARNING! T o Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with wet hands.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Simplicity Symmetry vacuum. How Long Coverage Lasts: Warranty coverage for Simplicity Symmetry models S20E and S20ENT lasts three years. Household models used commercially are only warranted for 90 days. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse or improper m aintenance.
Owner’s Warranty Information keep this for your records… Date of purchase Serial number Model number Purchased from: Store name Address City, State, Zip Telephone 25
www.SimplicityVac.com ©2013 Tacony Corporation B503-3400F 12.
