Owner's Manual

6
5.2 Receiver Panel
Numb
er
Name
Function description
1 HDMI OUT HDMI output port, connect to HDMI display device such as
TV or Projector with an HDMI cable.
2
CAT IN
Connect to CAT OUT port on the transmitter end with a
CAT6 cable.
3 Power Indicator
Lamp (Green)
The LED will illuminate when the receiver is powered on.
4
Data signal
Indicator Lamp
(Orange)
The LED will illuminate when the transmitter and the
receiver have signal transmission (link).
5
SERVICE port
For firmware updated use.
6
IR IN
Connect to wideband IR Receiver. The IR signal will be
transmitted to the IR OUT port of the transmitter.
7 DC 12V Plug DC 12V/1A power supply into the unit and connect
the adapter to an AC outlet.
(Note: The EXMICRO2 can be powered from either the RX
or the TX by 12V/1A power adapter, only one supply is
needed)
5.3 IR Pin Definition