Owner's Manual

7
Number
Name
Function description
1
POWER
LED
The LED will illuminate green when the
unit is
working, red when the unit is in standby
mode.
2 IR
IR receiver window. It accepts the
remote control signal of this device only.
3
CH1/CH2/
CH3/CH4
button
Selects input channel button (Please see
“6. Display Modes” detail description).
4
MODE
button
Press this button to cyclical selection
display mode output (Please see “6.
Display Modes” detail description). Press
this button up to 5s, the output screen is
full screen and equal proportion display.
5
RES.
Cycling select different output resolution.
Press this button up to 5s to opening or
closing window display frame.
6
SERVICE
port
Firmware update used. (Manufacture use
only.)
5.2 Rear Panel