Owner's Manual

19
y=0~2(0=all)
z=0~1(z=0,off,z=1 on)
hdmi output 1 arc off
r hdmi y arc!
Get the arc state of HDMI output y,
y=0~2(0=all)
hdmi out1 arc on
s spdif x mute y!
Enable/disable the audio outputs .
x=1~2(1=spdif
1 ,2=spdif 2 ) ,y=0~1( 0=unmute ,
1=mute)
spdif 1 mute
r spdif x mute!
Read the audio output state. x=1~2(1=spdif
1,
2=spdif 2 )
spdif 1 mute
Network setting
r ipconfig!
Get the Current IP Configauration
IP Mode: Static
IP: 192.168.1.72
Subnet Mask:
255.255.255.0
Gateway: 192.168.1.1
TCP/IP port: 23
Mac address:
00:1C:91:03:80:01
r mac addr!
Get network MAC address
Mac address:
00:1C:91:03:
80:01
s ip mode z!
Set network IP mode to static IP or DHCP,
z=0~1 (z=0 Static, z=1 DHCP )
Set IP mode:Static.
Please use "s net
reboot!"
command or repower
device
to apply new config!
r ip mode!
Get network IP mode
IP mode: Static
s ip addr xxx.xxx.
xxx.xxx!
Set network IP address
Set IP
address:192.168.1.
100. Please use "s net
reboot!" command or
repower device to
apply
new config! DHCP on,
Device can't config