Owner's Manual

13 / 15
6. Connection Diagram
1. Connect HDMI source devices (e.g. Blu-ray DVD) to HDMI input ports of the RPS1
with HDMI cable. Connect VGA source device (eg. PC/note-book) to VGA input ports
of the scaler switcher with a VGA cable.
2. Connect HDMI display device to the HDMI output port of the RPS1 with a HDMI
cable.
3. Connect speaker, headphone or specialized amplifier to AUDIO output port of the
RPS1.
4. Connect control device (e.g. PC) to RS232 port of the RPS1.
5. Connect DC12V power adaptor to the power port and power on.
Computer or
Third-party Control
System