AmpliPHI 3.8kWh Battery Installation Manual
Table Of Contents
- 1.0 – Introduction
- 1.1 – Online Resources
- 2.0 –Safety
- 3.0 – Pre-Installation
- 4.0 – Installation
- 5.0 – Programming
- 6.0 – Troubleshooting
- Appendix A – AmpliPHI Battery Safety & Green Attributes, Certifications
- Appendix B – AmpliPHI Approved External Chargers
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 | info@simpliphipower.com | SimpliPhiPower.com
| 5 |
© SIMPLIPHI POWER
The AmpliPHI Battery Warranty does NOT cover product damage caused by mishandling or improper use per
the Installation Manual, Integration Guides and Warranty, exposure to liquids, impacts from falling objects or
from being dropped, or attempts to repair the battery by any party other than SimpliPhi. The complete list of
Warranty Exclusions is included in the AmpliPHI Battery Warranty document:[Amplify Warranty Document
]
1.0 – Introduction
1.1 – Online Resources
The Product Documentation section of SimpliPhi’s web site (https://simpliphipower.com/product-
documentation/) includes Specification Sheets, Warranties, Installation & Operator’s Manuals, and Integration
Guides for all SimpliPhi’s current and legacy products.
SimpliPhi’s YouTube channel (https://www.youtube.com/channel/UCcuCaLT_G3Hhumteh-pI5yg/videos) has
instructional videos showing various steps of the battery installation process in detail.
1.2 – Technical Support
SimpliPhi Technical Support (805-640-6700 x 1, techsupport@simpliphipower.com) is available to take any
questions regarding this manual or general installation questions. For assistance with battery system
commissioning, SimpliPhi asks that a commissioning call be scheduled ahead of time with Technical Support.
We encourage you or your installer to contact SimpliPhi with any questions. We are committed to working with
you and your installation team to achieve a safe, reliable storage system that will provide years of maintenance-
free service that is covered by our Warranty terms & conditions.
1.3 – Product Overview
The AmpliPHI deep-cycle Lithium Ferro Phosphate (LFP) Battery is optimized with proprietary cell
architecture, power electronics, Battery Management System (BMS) with communications, manufacturing
materials and processes. This assures the highest grade and quality, longest cycle-life, greatest efficiency and
freedom from material impurities, toxicity and hazardous risk. The AmpliPHI Battery is modular, lightweight
and scalable. It provides power security and seamless integration of renewable and traditional sources of
energy in conjunction with or independent of the grid.
1.3.1 – Battery Management System (BMS)
Each AmpliPHI Battery contains circuitry that protects the LFP cells from damaging conditions
(overcharge, over-discharge, extreme load amperage, etc.). If pre-programmed BMS values are
exceeded, the protective circuitry will shut down the flow of electricity to/from the AmpliPHI Battery.
In some cases, the BMS will automatically resume the flow of electricity to/from the AmpliPHI Battery
when the battery is no longer in damaging conditions. In other cases, the AmpliPHI Battery’s self-
protection mechanism will result in the battery’s breaker tripping and requiring a manual re-set (refer
to Section 6.0 - Troubleshooting of this Manual for manual re-set instructions).
Regardless, once AmpliPHI Battery operation resumes and the connected inverter is back on,
SimpliPhi recommends checking that the inverter’s settings are still correct. Often, inverter system
settings will be saved within the inverter memory storage and will not need to be reset. Refer to
SimpliPhi’s AmpliPHI Integration Guides for inverter and/or charge controller settings
(https://simpliphipower.com/product-documentation/
).
REV202203161200