SimpliPhi Battery Manual

REV020620

| 14 |

4.0 – Installation

4.1 – Installation Options

The PHI 3.8 and PHI 2.9 Batteries can be mounted in practically any orientation (terminals up or on any side), with

no impact to the performance of the PHI Battery. Do not install them upside down, with the terminals facing the

floor.

4.2 – Environmental Considerations

4.2.1 – Charging at Temperatures Below Freezing

It is important to take necessary steps to determine the temperature of the PHI Battery prior to charging

the battery, as the battery may otherwise be adversely impacted.

CAUTION: Do not attempt to charge the PHI Battery below 32° F (0° C). Attempts to charge at

subfreezing temperatures can adversely affect SOH and cycle life and will Void the Warranty. If

the PHI Battery must be charged below 32° F (0° C), the rate of charge must be at no more than

5% of the PHI Battery’s rated capacity (C/20).

4.2.2 – Explosive Gas Precautions

PHI Batteries are not ignition protected. To prevent fire or explosion, do not install this product in locations

that require ignition-protected equipment. This includes any confined space containing vented batteries, or

flammable chemicals such as, natural gas (NG), liquid petroleum gas (LPG) or gasoline (Benzine/Petrol).

Do not install in a confined space with machinery powered by flammable chemicals, or storage tanks,

fittings, or other connections between components of fuel or flammable chemical systems.

PHI Batteries do not vent any harmful gasses and do not require special ventilation or cooling.

4.2.3 – Anti-Corrosion Protection

Anticorrosive compounds or epoxies are occasionally used in harsh or marine climate installations. Please

consult your electrician or qualified installer to determine if this is advisable, and if so, what solution best

suits your application.

CAUTION: Do not combine PHI Batteries with other brands or chemistries. Do not mix PHI

Batteries from different installations, clients or job sites. Either of these combinations will Void

the Warranty.

4.3 – Mounting Hardware

PHI Battery mounting brackets (sold separately) are designed to secure one PHI 3.8 or PHI 2.9 Battery to a load

bearing surface. The brackets can be mounted directly to a wall or can be arranged on strut channels for ease of

positioning (mounting hardware not included). Mounting brackets should be mounted into load bearing beams, studs

or solid materials with appropriate fasteners. A qualified installer should be familiar with accomplishing this with the