AccESS Installation Manual

REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail]| SimpliPhiPower.com
| 12 |
2.3.1 – AccESS Core Components
The core components within the AccESS unit include the below listed products. See Figures 2.0 &
3.0 for detail.
• Schneider Electric Conext XW Pro NA or XW+ 6848 NA
o 6.8 kW Continuous Output 120/240 V AC
o 12 kW AC Peak Output – 60 Seconds
• Conext Mini PDP
• (3) or (4) PHI 3.8 kWh Batteries (11.4 or 15.2 kWh)
• Conext System Control Panel
(SCP)
o Single point of control and set up for all connected Conext devices.
• Conext Battery Monitor
o Indicates hours of battery-based runtime and determines battery bank state
of charge. Conext Battery Monitor shares key battery bank parameters with
Conext XW Pro or XW+ inverter/charger.
2.3.2 – AccESS Optional Accessories
• Conext MPPT 80 600 (for DC Coupling)
The Conext
TM
MPPT 80 600 solar charge controller offers an industry-first set of
integration features and top performance that allows for large PV array systems to be
easily installed and connected to the PHI 3.8 Battery bank at the lowest overall cost.
Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers
and lowers overall costs further by utilizing fewer PV strings, smaller wiring and
conduit, and by eliminating the need for PV combiner boxes and DC circuit breakers.
• Conext Gateway
Conext
TM
Gateway is a multi-function communication device that provides an overall
view of system performance for residential power monitoring systems. It also provides
a communications gateway between a network of Xanbus
TM
-enabled devices and
Modbus devices.
• Conext Combox
The Conext™ ComBox is a powerful communications and monitoring device for
installers and operators of Conext solar systems. It features an integrated web server,
enabling graphic displays of system daily, monthly and lifetime energy data to be
viewed using a simple web browser or Android™ tablet device. Installers can change
or configure the settings of Conext devices through the user-interface on the
ComBox and respond to system email alerts promptly. A user-configurable data logger
and integrated FTP server provides the system owner with powerful analytics tools
for data download and analysis. Modbus™ interface on the ComBox links Conext
devices with third party systems through RS-485 or Ethernet ports. For large multi-
cluster systems, the ComBox can be setup in a master-slave configuration. Conext
ComBox easily connects with Conext Insight to enable you to remotely monitor a
portfolio of sites from any internet connected device like a laptop or a tablet.
• Conext Automatic Generator Start
The Conext
TM
Automatic Generator Start (AGS) can automatically activate or stop a
generator in response to changing power requirements. An excellent addition to an
off-grid or backup power system, the AGS seamlessly connects to the Xanbus
TM
network and shares status information with all other devices on the network. It can
monitor a set of system user-programmable parameters such as battery voltage, state
of charge or grid power and can activate the generator in response to any changes.
The AGS can also be configured remotely using the Conext System Control Panel