AccESS Installation Manual

REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail]| SimpliPhiPower.com
| 14 |
3.2 – System Sizing for Your Installation
The number of PHI 3.8 Batteries within the AccESS unit should be specified in terms of total storage
capacity before the initial installation based on the goals and objectives of the project. All PHI 3.8 Batteries
are balanced during final production and testing stages. Following proper wiring guidelines ensures that a
system will not require any manual balancing processes.
CAUTION: Do not combine PHI 3.8 Batteries with other brands or chemistries.
CAUTION: Do not mix PHI 3.8 Batteries from different installations, clients or job sites.
3.3 – Installation Tools and Materials
• Digital Multi Meter
• AC/DC Clamp On Current Meter
• Wire Stripper
• Impact Driver
• Masonry Bolts
3.4 – Installation Site Location
The AccESS may be installed indoors, such as a garage, or outdoors mounted onto a concrete pad. The
cabinet is rated for NEMA-3R use. Please see Figure 3.0 below for physical AccESS dimensions, as this may
impact the site location.