AccESS Installation Manual
Table Of Contents
REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 | info@simpliphipower.com| SimpliPhiPower.com
| 23 |
CAUTION: On the Conext Mini PDP, an additional circuit breaker will need to be installed.
The Generator will connect through this circuit breaker and to the XW Pro or XW+ 6848
inverter.
CAUTION: In an AC Coupled system configuration, an “either-or” interlocked switch must
be installed between the generator output and the inverter’s AC2 (gen) input. Failure to
install this additional switch creates the potential for power to back feed from the grid-tie
inverter to the generator. Refer to Schneider Electric’s AC Coupling Application Note for
more details.
Figure 8.0 – Optional Generator Installation/Connection Diagram