Express Operator's Manual

REV090619
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
| 9 |
3.0 – Installation
3.1 – Unpacking and Inspection
When the PHI ExprESS arrives, inspect all cartons for signs of rough handling or damage. If the
equipment itself shows evidence of damage, record the damage on the receiving document before
signing for receipt of the equipment. Damage claims should be filed directly with the carrier.
After checking for signs of damage, perform the following steps to unpack the equipment:
1. Open all cartons.
2. Compare the items received to the packing list. If an item is missing or damaged, contact SimpliPhi
Power.
3. Remove all packing materials, envelopes, and boxes from the cartons. Please keep all packing
materials and cartons in case you need to transport or ship the unit.
The PHI ExprESS includes the following items:
• This Operator Manual
• Two PHI battery storage modules based on the ExprESS model:
− ExprESS 5.8: two PHI 24V 2900Wh battery storage modules
− ExprESS 7.6: two PHI 48V 3800Wh battery storage modules
• One AC power cable
• One solar-power connector
3.2 – Required Tools for Battery Installation
The following tools are required to install the PHI ExprESS Batteries:
• Torque wrench
• 11/16 deep socket
• Ratcheting socket wrench
• 3/8 socket
• Protective wear
3.3 – Selecting a Location
The PHI ExprESS is a welcome addition to any commercial or residential facility. It is designed for use
anywhere you would plug a device into a wall outlet or extension cord. It is ideally suited for use as an
office or kitchen UPS. It also provides useful power for contractors on remote job sites or for any off-grid
work site.
The ExprESS is moisture-resistant. However, keep it away from excessive moisture, mist, rain or
wetness. Keep the ExprESS isolated from flammable materials or vapors.