Specification Sheet

3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | Simpl
iPhiPower.com
Power. On Your Terms.™
© 20
21
SIMPLIPHI POWER, INC. REV202106291121
-4° to 140°F (-20° to 60°C)
32° to 120°F (0° to 49°C)
<1% loss per month
5,000+ (@ 80% DoD)
None
5 years
11.25 x 9.25 x 6.25 inches/0.37 cu ft
(23.50 x 28.58 x 15.88 cm/0.01 m
3
)
32.65 lbs (14.8 kg)
Operating Temp
1
Self-Discharge Rate
Cycle Life
Memory Effect
Warranty Period
Dimensions
The PHI 1.2
TM
kWh 160 Amp deep-cycle Lithium Ferro Phosphate
(LFP) battery is optimized with proprietary cell architecture, power
electronics, BMS and assembly methods. It is modular, lightweight and
scalable. Provides power security and seamless integration of
renewable and traditional sources of energy in conjunction with or
independent of the grid: net zero, peak shaving, emergency back-up,
portable and mobile.
• 24V LFP storage module with proprietary architecture and Battery Management
System (BMS)—does not require ventilation, cooling or thermal regulation
• Compatible with all industry standard inverter/charge controllers
• Drop in replacement for lead acid
• LFP is the safest, most environmentally benign Lithium Ion chemistry available—no cobalt, risk of thermal runaway or fire
• No AC or toxic liquid cooling—negligible parasitic drain—long cycle life
• Non-toxic and non-hazardous recyclable materials
PHI 1.2
TM
High Output 24V
DC Voltages – Nominal 25.6V
Amp Hours 48 Ah
Rated kWh Capacity (@ C/2)
1.2 kWh
Max Output Capacity 160 Amps
Max Charge
Current 50 Amps
DC Voltage Range
1
20 to 28.8 V
Depth of Discharge
1
up to 100%
Operating Efficiency
98%
HIGH OUTPUT BATTERY
• All specifications listed are typical/nominal and subject to change without notice.
• UN 3480, Lithium ion batteries, 9, II
• UL, CE, UN/DOT and RoHS compliant components
• Designed and built in California, USA
1.2
TM
1. Max operating conditions. Refer to Installation Manual for recommended conditions.
Charge Temp
1
Weight