User's Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance

Remove the battery activation strip.Þ

Align the magnet with the grooves on the Sensor Þ so

that the two pieces are less than 2 inches apart when

the door or window is closed.

Test the alignment before you adhere each piece. The

blue light should ﬂash once when the door or window

opens and twice when it closes.

Adhere the Sensor and magnet to a door and doorframe Þ

or window and windowframe.

You can put the Sensor on the door and the magnet on

the doorframe, or the other way around. There is no

“right side up” to the Entry Sensor.

E. Install Entry Sensors on doors and windows

Closed door

Sensor

Magnet

Grooves

Open door

Closed window Open window

Door example:

The sensor is installed on

the doorframe and the

magnet on the door. When

the door is closed, they are

less than 2 inches apart.

When the door swings

open, the sensor will be

triggered.

Window example:

The sensor is installed on

the windowframe and the

magnet on the window.

When the window is closed,

they are less than 2 inches

apart. When the window

slides open, the sensor will

be triggered.

Notice how the sensor can

be placed at a right angle

to the magnet.