User's Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance

At any time (whether or not the alarm is on) just press a

panic button for 1 full second to immediately sound the

alarm and notify the Emergency Dispatch Service.

Tip: Your Keychain Remote is similar to a car alarm

remote – it works within about 50 feet of the Base

Station. You can use the Panic Button on your Keychain

Remote while you are near or in your apartment, but it

will not function while you are in a different location.

C. Use the Panic Button in an emergency

What happens when a sensor is triggered?

When your alarm is on and an Entry Sensor or Motion Sensor is triggered, the Keypad Þ

will start beeping and prompt you for your PIN. You have 30 seconds to turn the

alarm off – this time is called the “entry delay.”

If the alarm is not turned off within the 30 second entry delay, SimpliSafe will sound an Þ

85 decibel siren for four minutes and send an alert signal to our Emergency Dispatch

Center. You must activate your service in Step 2 for this service to function.

Upon receiving the signal, the Dispatch Center will attempt to contact you.Þ

If it was a false alarm and you provide your previously chosen “safe word,” no Þ

authorities will be dispatched.

If it is a true emergency or if they are unable to reach you, they will immediately Þ

dispatch the police to your location.

Tip: If you accidentally set off your alarm, enter your PIN to turn off the siren. You can call

SimpliSafe at 1-888-95-SIMPLI (957-4675) to notify us of the false alarm or wait for the call

from our Dispatch Center. Be sure to answer the phone and have your “safe word” ready

to verify your identity.

Congratulations! Setup is complete and you can

start using your SimpliSafe system now. Feel free

to read on for more information about your System.

Please remember to test your system regularly.