User's Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance

Install your Entry Sensors

•Remove the battery activation strip.

•Align the magnet with the sensor’s grooves

so the two pieces are less than 2 inches

apart when the door or window is closed.

Tip: Test the alignment before you adhere each piece.

The blue light should ﬂash once when the door or

window opens and twice when it closes.

•Adhere the Sensor on the door and the

magnet on the doorframe, or the other way

around. There is no “right side up.”

Sensor

Magnet

Grooves

Closed—magnet is within 2

inches of the sensor, aligned

between the sensor grooves.

Window Example

Door Example