User's Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance

Install your Carbon Monoxide Detector

• Remove the battery activation strip.

• Separate the mounting bracket from the

back of the CO detector by rotating it

counter clockwise.

• Mount the bracket to your wall or ceiling

using the included screws and wall anchors.

• Push the CO Detector against the mounting bracket and

rotate it clockwise until it snaps into place. Pull gently on

the detector to make sure it’s securely attached.

• This detector is for household use only. There are local laws

that apply to CO Detectors. Please refer to the information

included in the detector box and consult with your local ﬁre

department regarding any requirements.

Mounting Bracket

Do not install near your

furnace, stove, ﬁreplace,

kitchen or garage.

Typical installation

locations include placing

CO detectors near your

sleeping areas and on each

level of your home.