User's Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance

• Remove the battery activation strip

• Remove mounting bracket from the

Detector by rotating it counterclockwise.

• Install the bracket on the wall or ceiling

using the included screws and wall

anchors.

Install your Smoke Detectors

Do not install near your

furnace, stove, ﬁreplace,

kitchen or garage, or

bathroom with a shower.

Make sure to place a Smoke

Detector near your sleeping areas.

For maximum protection place one

on each level of your home.

• Push the Smoke Detector against the mounting bracket and

rotate it clockwise until it snaps into place. Pull gently on

the detector to make sure it’s securely attached.

• This detector is for household use only. There are local

laws that apply to Smoke Detectors. Please refer to the

information included in the detector box and consult with

your local ﬁre department regarding any requirements.

Mounting

Bracket