User's Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
8
3. Stay safe
Modes
Your alarm system has 3 modes: Away,
Home and Off. Turn your alarm on by
putting it in Away or Home mode. Turn
your alarm off by putting it in Off mode.
Mode buttons
Mode icons
Away Mode
Use this mode when you are leaving.
All Entry Sensors, Panic Buttons and
Motion Sensors will be active.
Close all doors and windows.Þ
Press Þ
away
on your Keychain Remote
or Keypad.
You have 60 seconds to exit before Þ
the alarm is active.
Tip: To cancel during the exit delay,
simply press
off
.
Use the same method to turn off your alarm, whether it is in the home or away mode.
Press Þ
off
on your Keychain Remote OR
Press Þ
off
, followed by your 4 digit PIN, on the Keypad.
If you make a mistake entering your PIN, press
delete
to back up or
off
to start over.
If a sensor is triggered, there will be a 30 second entry delay before the alarm siren
sounds and the Emergency Dispatch Service is notified.
Tip: You can adjust advanced settings like the entry and exit delays by using the
SimpliSafe Easy Setup Wizard, described on the cover of this manual.
Home Mode
Use this mode when you are staying
home. All Entry Sensors and Panic
Buttons will be active, but the Motion
Sensors will not be active.
Close all doors and windows.Þ
Press Þ
home
on your Keypad.
Your Entry Sensors and Panic Buttons Þ
will be active immediately. Motion
Sensors will not be active – you can
move freely around your home.
A. Turn your alarm ON
B. Turn your alarm OFF
off away home