Installation Guide

1701 Charleston Regional Parkway, Suite A | Charleston, SC 29492
[phone] | www.amconservationgroup.com
AM CONSERVATION GROUP//COMMERCIAL LIGHTING
SIMPLY CONSERVE | 12.5W | J-BOX DOWNLIGHT - REMOTE DRIVER | 6” | 3000K | IC RATED
INSTRUCTIONS:
CAUTION:
To avoid possible electrical shock, be sure that power supply is turned off at
the fuse box/circuit breaker before installing or servicing the xture.
1. RISK OF FIRE OR ELECTRIC SHOCK - The electrical rating of this product is 120V AC.
2. DANGER - Risk of shock. Disconnect power before installation.
3. WARNING - To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or
other sharp objects.
4. Suitable for damp locations.
5. This product must be installed in accordance with any applicable installation code(s) by a qualied
electrician or person familiar with the construction and operation of the product and the hazards involved.
6. This device is not intended for use with emergency exits.
For your safety, please read instructions completely before beginning the installation.
PRE-INSTALLATION:
1. Turn power OFF from the electrical panel before starting installation.
2. Locate a suitable position to plate the xture and open in accordance to the cut-hole dimensions (refer to
Hole Cut Table for appropriate size).
3. Run electrical wire from the switch (power supply) through the mounting hole - use NMD90 Romex or BX cable.
4. Suitable for damp locations.
5. This product must be installed in accordance with any applicable installation code(s) by a qualied
electrician or person familiar with the construction and operation of the product and the hazards involved.
6. This device is not intended for use with emergency exits.