Installation Guide

1701 Charleston Regional Parkway, Suite A | Charleston, SC 29492

(843) 971-1414 | www.amconservationgroup.com

AM CONSERVATION GROUP//COMMERCIAL LIGHTING

LED T8 | UL TYPE B | DOUBLE-END BYPASS L17T8G35BDE - L17T8G50BDE SERIES

MODEL NUMBER

MINIMUM COMPARTMENT DIMENSIONS

(LENGTH X WIDTH X HEIGHT) (MM)

LAMP QUANTITY

LYYT8GXXBDE 1230 x 340 x 45 4

INSTRUCTIONS

SAFETY PRECAUTIONS:

1. PRODUCT FEATURES:

2. PRODUCT APPLICATIONS:

3. INSTALLATION INSTRUCTIONS:

For yours and others’ safety, please read the precaution’s carefully before installation:

(1). Product should be installed by qualied electrician.

(2). Switch off the power supply before beginning work and make sure the connection is correct before

powering on.

(3). NOT FOR EMERGENCY LIGHTING.

(4). Direct replacement for 32/30/28/25W 48T8 lamps only.

(5). CAUTION: RISK OF FIRE. USE ONLY IN PLACE OF FLUORESCENT LAMPS SPECIFIED

ON LABEL.

• UL certied

• Full glass housing: No Aging, Yellowing, Bending.

• Double ended:

Widely used in residential buildings, ofces, shopping malls, supermarkets, hospitals, assembly lines, warehouses, etc. for

energy saving illumination.

Please comply with all instructions to ensure that the product is installed in safe conditions.

The units covered by this report were intended to retrot surface mount, Type IC or non-IC recessed

mount Listed uorescent luminaires that use maximum 4 tubular lamps. The minimum lamp

compartment dimensions are tabulated below:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

PAGE 1
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B | DOUBLE-END BYPASS L17T8G35BDE - L17T8G50BDE SERIES INSTRUCTIONS 1. PRODUCT FEATURES: • UL certified • Full glass housing: No Aging, Yellowing, Bending. • Double ended: 2. PRODUCT APPLICATIONS: Widely used in residential buildings, offices, shopping malls, supermarkets, hospitals, assembly lines, warehouses, etc. for energy saving illumination. 3.
PAGE 2
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B | DOUBLE-END BYPASS L17T8G35BDE - L17T8G50BDE SERIES WIRING DIAGRAMS THE BELOW BALLAST WIRING REPRESENTS TYPICAL CONFIGURATION. The actual ballast wiring varies according to ballast model. It is not necessary to change the socket (if it is in good condition) to operate double ended lamps, regardless the type of sockets. Please make sure one side of fixture is connected to Live (L) and the other side to Neutral (N).
PAGE 3
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B | DOUBLE-END BYPASS L17T8G35BDE - L17T8G50BDE SERIES 1701 Charleston Regional Parkway, Suite A | Charleston, SC 29492 (843) 971-1414 | www.amconservationgroup.