Manualshelf

Installation Guide

ManualsBrandsSimply Conserve ManualsCommercial LightingField Adjustable 2 Ft. x 4 Ft. Selectable Kelvin and Lumen Integrated LED Panel Light (4-Pack)
123
Emergency Battery Installation Manual for Back-Lit Flat Panels
Flex A
Flex B
Flex A
1.
Insert the high-voltage side (Flex A) of the emergency power into the bracket slot, and then fix the emergency
battery to the supporting bridge by using two screws on Flex B side and two screws on Flex A side.
B
1
2. Screw out A1/A2/B1/B2.
3. Install the EM supporting bridge on the back plate and screw in A1/A2/B1/B2 and wiring. The high-voltage
side of the EM battery is in the same direction as the driving high-voltage section.
4. Wiring Diagram