welcoming • sophisticated • inspiring ITEM #0804780 11 FT LED CANTILEVER UMBRELLA MODEL #AG45RLD-LS-3 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-844-230-9904, 8 a.m. – 8 p.m., EST, Monday - Friday.
PACKAGE CONTENTS Thank you for purchasing SimplyShade’s 11-ft LED Cantilever Umbrella. B A BB DD EE CC F AA CC C DD PART DESCRIPTION QUANTITY A Umbrella 1 B Solar Panel 1 C Rotating Hub 1 D Metal Stand 1 E Plastic Base 1 F AC Adapter 1 FF Base Plug 4 GG Pole Cap 1 E D NOTE: The Solar Panel (B) contains two lithium batteries (2 x 2200mAh). Do not attempt to open the solar panel when in use. AC Adapter (F) Input: 100V~240V AC, Output: 4.
HARDWARE CONTENTS (not shown to actual size) AA BB Large Wrench Qty: 1 Small Wrench Qty: 1 CC Bolt Qty: 6 DD EE Washer Qty: 6 Crank Handle Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING Assemble on a soft, clean, non-abrasive surface to avoid damage to the item. Item is heavy. Use care when handling. May require two adults for safe assembly.
ASSEMBLY INSTRUCTIONS 1. Assemble the Metal Stand (D) by overlapping the metal bars together on the ground in a cross pattern as shown. 1 2. Line up the holes in the Rotating Hub (C) on top of the Metal Stand (D). Secure the Rotating Hub (C) to the Metal Stand (D) with 4pcs Bolts (CC) and 4pcs Washers (DD). Tighten with the Large Wrench (AA). 2 D AA CC DD Hardware Used C AA Large Wrench x1 CC Bolt x4 DD Washer x4 3. Remove each Base Plug (FF) by turning counterclockwise .
ASSEMBLY INSTRUCTIONS 4. Assemble the Plastic Base (E) by interlocking the 4pcs together onto the Metal Stand (D). 4 You may need to reposition the pedal on the Rotating Hub (C) in this step. To do this, press down on the pedal and rotate either direction to reach desired position. C D E 5. To install the Solar Panel (B), remove the Pole Cap (GG) on top of the umbrella pole by turning in a counter-clockwise direction .
ASSEMBLY INSTRUCTIONS 7. Line up the two holes in the bottom of the Umbrella (A) pole with the Rotating Hub (C) and slide the Umbrella (A) pole down over the Rotating Hub (C) . Using the Large Wrench (AA), secure the Umbrella (A) pole to the Rotating Hub (C) with 2pcs Bolts (CC) and 2pcs Washers (DD) . AA Large Wrench x1 CC Bolt x2 DD Washer x2 7 A CC C AA E DD OPERATING INSTRUCTIONS 8. With the umbrella in an upright position, unfasten the Storage Tie from around the canopy.
OPERATING INSTRUCTIONS 10. To rotate the Umbrella (A) canopy horizontally, place foot on the foot pedal of the Rotating Hub (C) and hands on the umbrella pole. Depress the pedal and rotate the umbrella in either direction to reach desired position. Release foot pedal to lock into place. WARNING: Always close the umbrella and secure the canopy to the umbrella pole with Storage Tie when not in use and during high winds or rain. Failure to do so may result in personal injury and/or damage. 11.
CARE AND MAINTENANCE . Before using, clean the product completely with a soft, dry towel. . Wash with a mild solution of soap and water; rinse dry completely. Do not use strong detergent or abrasive cleaners. . Store the product in a cool, dry location away from sunlight. . Store the umbrella out of bad weather or high winds. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1. The solar panel may not be properly installed.
