Installation Guide

99
Some connectors install with the
¼ " Strong-Drive
®
SDS Heavy-Duty
Connector screw
1. Install with  " hex socket or
nut driver
2. Predrilling generally not required
3. Do not substitute with lag screws
Algunos conectores se instalan con
el ¼" Strong-Drive
®
SDS Heavy-Duty
Connector screw.
Bolt
Diameter: ½" , " , ¾" , " , 1 "
Pernos
Diametro: ½" , " , ¾" , " , 1 "
1. Instalar con un destornillador de casquillo
hexagonal o de tuercas de  "
2. Generalmente no es necesario efectuar
perforaciones previas
3. No sustituir con tirafondos
Fasteners/Clavos
Titen
®
2 Hex-Head Masonry Screw
Diameter: ⁄" , ¼"
Tornillo Para Mampostería
Diametro: ⁄" , ¼"