Product Brochure

Outdoor Accents
®
Decorative Hardware
© 2018 Simpson Strong-Tie Company Inc. F-C-OAMISSION18
8
Angles / Ties / Post Connections
Decorative Side Plates
Model No. Ga.
Dimensions (in.) Fastener Qty.
W H Column
APB44DSP
12
3 6
¾
4
APB66DSP 5 7 ¼
APB88DSP 7 10 ⁄
8
APB1010DSP 9 10 ¾
1. All fasteners are a Simpson Strong-Tie SDWS22312DBB inserted through an STN22 washer.
Quantities listed are for two parts. Fasteners sold separately.
2. Install top of decorative side plates flush to top of post base strap legs. Decorative side plates
installed on APB post bases will be raised up ¼" from the bottom of the post base, while
installations on rough models will not.
APB88 with
optional
decorative
side plate
W22
312
W22
312
W22
312
W22
312
312
W22
312
W22
312
W22
312
W22
312
W22
312
W22
L
H
APB66APB44
312
W22
312
W22
L
H
Post Base
Model No.
Ga. Dimensions (in.) Fastener Qty.
DF/SP Allowable
Loads (lb.)
Base Strap L W H
Column
(qty.)
Anchor
(dia.)
Uplift
(160)
Down
(100)
APB44 16 12 3 3
⁄ 7 4 (1)  " 1,035 6,725
APB44R 16 12 3 4
⁄ 6 ¾ 4 (1)  " 1,035 6,725
APB66 12 12 5 5
½ 7 ½ 4 (1)  " 1,260 11,450
APB66R 12 12 5 6 7
¼ 4 (1)  " 1,260 11,450
APB88 14 12 7 7
½ 10 ⁄ 8 (2)  " 2,670 22,255
APB88R 14 12 7 8
10 ⁄ 8 (2)  " 2,670 22,255
APB1010 14 12 9 9
½ 11 8 (2)  " 2,365 23,725
APB1010R 14 12 9 10 10
¾ 8 (2)  " 2,365 23,725
1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed.
Reduce where other loads govern.
2. Specifier to design foundation for uplift.
3. Downloads shall be reduced where limited by the post.
4. All column fasteners are a Simpson Strong-Tie
®
SDWS22312DBB inserted through an
STN22 hex-head washer.
5. Post bases do not provide adequate resistance to prevent members from rotating about the
base and therefore are not recommended for non-top-supported installations (such as fences or
unbraced carports).
Heavy Angles
Model No. Ga.
Qty.
Req.
2
Dimensions (in.) Fastener Qty.
DF/SP Allowable
Loads (lb.)
L W
1
W
2
Column Beam Uplift F
1
APA4 12 (2) 3 3 ¼ 3 2 2 710 1,220
APA6 12 (2) 5 3 ¾ 3 ½ 4 4 1,265 1,985
1. Uplift and lateral loads have been increased for earthquake or wind loading with no further increase
allowed. Reduce where other loads govern.
2. Connector table loads and fastener quantities listed are for two parts. For single-part installations, use half
the listed values.
3. All fasteners are a Simpson Strong-Tie
®
SDWS22312DBB inserted through an STN22 hex-head washer.
Fasteners sold separately.
Light Rafter Tie
Model No. Ga.
Dimensions (in.) Fastener Qty.
DF/SP Allowable
Loads (lb.)
L W
1
W
2
Column Beam Uplift F
1
APA21 14 1  2 1 ½ 1 1 200 120
1. Uplift and lateral loads have been increased for earthquake or wind loading with no further increase
allowed. Reduce where other loads govern.
2. Allowable loads are for a single part.
3. All fasteners are a Simpson Strong-Tie SD10112DBB. Fasteners sold separately.
APA6
W22
512
W22
512
W22
512
W22
512
W22
512
W22
512
F
2
F
1
W22
512
W22
512
W22
512
W22
512
W22
512
W22
512
F
2
F
1
W
2
L
1025
1025
F
1
APA21
1025
1025
F
1
L
W
1
W
2
W
1