Specification

Simpson Strong-Tie
®
Anchoring and Fastening Systems for Concrete and Masonry
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
77
Adhesive Accessories
RFBs are pre-cut threaded rod, supplied with nut and washer. For use with
Simpson Strong-Tie
®
adhesives. May be ordered in bulk without the nut and washer. Use
with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry. Offers
a complete engineered anchoring system when used with Simpson Strong-Tie anchoring
adhesives. Each end of the threaded rod is stamped with rod length in inches and our
“No-Equal”symbolforeasyidenticationafterinstallation.
MATERIAL: ASTM F1554 Grade 36
FINISH: Zinc-plated, hot-dip galvanized
Retrofit Bolts
Used in conjunction with anchoring adhesive and screen tubes, adhesive shear
tubes transfer anchor shear loads over a larger area, reducing localized crushing
in unreinforced masonry installations. Required for thru bolt applications per
ICC-ES's unreinforced masonry anchorage "Configuration C" detail. For detailed
installation instructions refer to the appropriate adhesive anchor ICC-ES report.
MATERIAL: Steel
FINISH: Zinc-plated
Adhesive
Shear Tube
Configuration C
WIRE MESH
SCREEN TUBE
6"x6"x
3
⁄8"
STEEL
PLATE
STEEL SLEEVE
(SHEAR TUBE)
HEX
NUT
5
⁄8" DIA.
THREADED ROD
Adhesive Shear Tubes
1. Bulk quantities do not include the nut and
 washerandmustbeorderedwitha“-B”
suffix (example: RFB#4x5-B). Hot-dip
galvanized RFB’s not available in bulk.
2.Retailpacksmustbeorderedwitha“-R”
suffix (example: RFB#5x12HDG-R).
Brushes are used for cleaning drilled holes prior to adhesive anchor
installation. Brushes have a twisted wire handle with nylon bristles.
ETB
Hole Cleaning Brushes
RFB
Retrofit Bolts
Description
Dia. Length
ZincPlated
Model No.
Hot-Dip Galvanized
Model No.
Ctn
Qty
Bulk
1
Qty
Retail
2
Pack
1
⁄ 2 " x 4" RFB#4x4 RFB#4x4HDG 50 50 −
1
⁄ 2 " x 5" RFB#4x5 RFB#4x5HDG 50 50 10
1
⁄ 2 " x 6" RFB#4x6 RFB#4x6HDG 50 50 10
1
⁄ 2 " x 7" RFB#4x7 RFB#4x7HDG 50 50 10
1
⁄ 2 " x 8" − RFB#4x8HDG − − 10
1
⁄ 2 " x 10" RFB#4x10 RFB#4x10HDG 25 − 10
5
⁄ 8 " x 5" RFB#5x5 RFB#5x5HDG 50 50 10
5
⁄ 8 " x 8" RFB#5x8 RFB#5x8HDG 50 − 10
5
⁄ 8 " x 10" RFB#5x10 RFB#5x10HDG 50 − 10
5
⁄ 8 " x 12" − RFB#5x12HDG − − 10
5
⁄ 8 " x 16" RFB#5x16 RFB#5x16HDG 25 25 10
3
⁄ 4 " x 10
1
⁄ 2 " RFB#6x10.5 RFB#6x10.5HDG 25 25 −
Description
Model
No.
For Anchor/Rebar
Diameter
(in.)
For Hole
Diameter
(in.)
Ctn
Qty
½" dia x 3" brush
(8" total length)
ETB4
1
⁄ 4 " –
5
⁄ 16 "
3
⁄ 8 " –
7
⁄ 16 " 24
3
⁄ 4 " x 4" brush
(16" total length)
ETB6
3
⁄ 8 " –
5
⁄ 8 "
1
⁄ 2 " –
3
⁄ 4 " 24
1" x 4" brush
(16" total length)
ETB8
3
⁄ 4 "
13
⁄ 16 " –
7
⁄ 8 " 24
1" x 4" brush
(24" total length)
ETB8L
3
⁄ 4 "
13
⁄ 16 " –
7
⁄ 8 " 24
1
1
⁄ 4 " x 4" brush
(29" total length)
ETB10
7
⁄ 8 " – 1" 1" – 1
1
⁄ 8 " 24
1
5
⁄ 8 " x 6" brush
(34" total length
ETB12 1
1
⁄ 4 " 1
3
⁄ 16 " – 1
3
⁄ 8 " 24
Description
(in.)
Model
No.
For use with
Simpson Screen
Model No.
1
Drill Bit
Dia.
(in.)
Threaded Rod
Diameter
(in.)
Carton
Qty.
13
⁄ 16 x 8 AST800 ETS758, ATS758 1
5
⁄ 8
1
1.Screenssoldseparately.NotforusewithSimpsonStrong-Tiescreen#ETS758P
orATS758PplasticOpti-Meshscreentubes.
Adhesive Accessories